Dulux Trade Vinyl Matt - Pure Brilliant White

It is suitable for most interior walls and ceilings, including plaster, drywall, and blown or vinyl wallpapers.

No, Dulux Trade Vinyl Matt is specifically designed for interior use only and should not be used on exterior surfaces.

One litre of Dulux Trade Vinyl Matt covers up to 17 square metres, depending on the surface and application method.

The recoat time is typically between 2 to 4 hours, but this can vary depending on temperature and humidity.

After removing as much paint as possible from your tools, clean them thoroughly with water.

While it offers a durable finish, it is a matt emulsion. For areas with high moisture or frequent washing, a vinyl silk or kitchen/bathroom specific paint might be more suitable.

Ensure the new plaster is fully dry. Seal the surface with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint).

This paint has a very low Volatile Organic Compounds (VOC) content, labelled as minimal (0 - 0.29%).

Stir thoroughly. If necessary for spray application, thin with clean water according to the dilution guidelines for your specific method (conventional or airless spray).

Ensure the paint is applied evenly and with consistent pressure. For roller application, use a suitable roller sleeve. Allow the correct drying time between coats. If applying to new/bare surfaces, ensure adequate sealing with a thinned coat.

Ensure the surface is properly prepared and that the existing paint is sound. Apply a second coat if the first coat did not achieve full opacity, especially if there is a significant colour change.

Verify that the surface was clean, dry, and sound before application. New or bare surfaces should be properly sealed with a thinned coat of paint.