Dulux Trade Vinyl Matt Tinted Colour Match - 10L

While it can be used on walls and ceilings in a bathroom, it is not specifically formulated for high-moisture environments. For best results and durability in steamy areas, consider a specific bathroom paint or ensure excellent ventilation and consider a pre-sealing step.

Clean all brushes, rollers, and spray equipment immediately after use with warm water. Remove as much excess paint as possible before washing.

For best results and full coverage, two coats are recommended. However, on previously painted surfaces in good condition with a similar colour, one coat may be sufficient.

It is not recommended to mix different colours of Vinyl Matt paint, especially if aiming for specific shades, as this can lead to inconsistent colour results. It's best to purchase the required colour or use a colour-matching service.

Dulux Trade Vinyl Matt has a very low VOC content, labelled as 'Minimal (0 - 0.29%)', with a stated content of 1 g/l.

Yes, Dulux Trade Vinyl Matt can be tinted to match thousands of colours, including RAL and BSC standards, and can also be colour-matched to other shades.

The recoat time is typically between 2 to 4 hours, depending on the ambient temperature and humidity levels.

Ensure consistent application technique, avoiding over-brushing. Check if the surface was properly prepared and sealed. Apply a second coat if necessary, ensuring even distribution.

Surface was likely not clean, dry, or sound before painting. Remove affected paint, prepare the surface thoroughly, and reapply using the correct primer/thinned coat for bare surfaces.

Use a high-quality brush or roller appropriate for matt emulsions. Apply paint evenly and avoid overworking it. For spray application, ensure correct dilution and technique.

Colours can vary slightly. Ensure you purchase sufficient paint for the entire job from the same batch or source, especially for tinted colours. For colour matching, precise preparation is key.