Ft Paints Texture Paint Kit - White - 2750ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is a premium semi-gloss, textured topcoat designed for professionals seeking a durable and decorative finish for industrial machinery, components, tools, and steel structures. Its key benefit is the ability to hide surface imperfections while providing robust protection against impact, UV rays, weather, and chemicals. A potential caveat is that its 2K formulation requires proper mixing of paint, hardener, and thinner for optimal performance.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-PU300-P1.90L-H0.48L-T0.37L-S-CV |
| Brand | FabioT. |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is a 2K polyurethane paint?
A 2K (two-component) polyurethane paint requires mixing a base component (paint) with a curing agent (hardener) before application. This chemical reaction creates a very durable and resistant finish.
What surfaces can this paint be used on?
It is designed for metal surfaces such as industrial machinery, components, tools, lockers, and steel structures.
How do I achieve the textured finish?
The textured finish is inherent to the paint's formulation. Proper application technique and appropriate spray equipment settings will help achieve a consistent texture.
Can this paint be applied with a brush?
While primarily designed for spray application (spray gun or airless), refer to the product's technical data sheet for specific guidance on alternative application methods.
What is the shelf life of the mixed paint?
Once mixed, the paint has a limited pot life and must be used within a specified time frame before it begins to cure. Refer to the product documentation for the exact pot life.
Is this paint suitable for outdoor use?
Yes, the paint is UV and weather resistant, making it reliable for outdoor applications.
How should I clean up the equipment after use?
Clean application equipment immediately after use with the recommended thinner specified by the manufacturer.
Troubleshooting
Paint not curing or remaining tacky
Verify the correct mixing ratio of paint, hardener, and thinner. Ensure the hardener was added and mixed thoroughly. Check ambient temperature and humidity, as these can affect curing.
Poor adhesion or peeling
Ensure the surface was properly prepared (clean, dry, degreased, and possibly abraded). Re-check compatibility with any primer used. Ensure correct application technique was followed.
Uneven texture or finish
Adjust spray gun settings (pressure, nozzle size) or application technique. Ensure the paint mixture is homogenous and free of dried material. Stir or re-mix if sedimentation has occurred.
Runs or drips
Reduce application thickness by applying thinner coats. Increase spraying distance or reduce spray gun speed. Ensure proper viscosity of the mixture.
Pros and Cons
Pros
- Provides a durable, textured finish that masks surface imperfections.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Offers strong adhesion and good flow for uniform application.
- Suitable for a wide range of industrial and commercial applications.
- Enhances the longevity and aesthetic appeal of treated surfaces.
Cons
- Requires careful mixing of paint, hardener, and thinner (2K system).
- May require specialized application equipment (spray gun or airless sprayer).
- Specific ventilation and safety precautions are necessary due to the chemical nature of the product.
- Drying and curing times can be longer than single-component coatings.
Setup, Compatibility & Care
Setup: This product is a 2K (two-component) system. It requires precise mixing of the paint, hardener, and thinner in the proportions specified by the manufacturer before application. Ensure a clean, dry, and well-ventilated area for application. Surfaces must be clean, dry, and free from grease, oil, and dust. Lightly abrading the surface may improve adhesion. Refer to the product's technical data sheet for exact mixing ratios and application temperatures.
Compatibility: Primarily designed for metal surfaces including industrial machinery, components, tools, lockers, and steel structures. It is compatible with most standard industrial primers. Always test on a small, inconspicuous area if unsure about compatibility with existing coatings or substrates.
Care: Once fully cured, the finish is durable and resistant. Cleaning can be done with mild detergents and water. Avoid using harsh solvents or abrasive cleaners, which can damage the coating. Regular inspection for any signs of wear or damage is recommended for optimal longevity.