Taskar Picture Hanging Plate Kit - Multicolor
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Taskar Picture Hanging Plate Kit is designed for individuals needing a simple, self-adhesive solution to hang artwork, mirrors, and flat panels without damaging walls. Its key benefit is ease of use and strong adhesion on various surfaces. A potential caveat is the weight limit of 3.6kg per pair. This kit provides two 100x100mm flat steel hangers with strong adhesive backing, suitable for use on flat board, acrylic, glass, and mirrors, allowing you to hang items on hooks, screws, or nails.
All features
| Colour | Multicolor |
|---|---|
| Brand | Taskar |
Extended Product Information
FAQs
What is the maximum weight this product can hold?
Each pair of Taskar Picture Hanging Plates can support a maximum recommended weight of 3.6kg.
What surfaces are these hangers suitable for?
They are suitable for flat board, acrylic, glass, and mirrors, provided the surface is smooth and clean.
Do I need any tools to install these hangers?
No, installation is tool-free as the hangers are self-adhesive. You will need the item to be hung to have a hook, screw, or nail on it for wall hanging.
How do I prepare the surface for application?
Clean the surface thoroughly with the provided alcohol wipe to remove dust, grease, and any residue. Ensure the surface is completely dry before applying the hanger.
Can I reposition the hanger after applying it?
It is not recommended to reposition the hanger once applied, as this can compromise the adhesive strength. For best results, ensure correct placement before pressing firmly.
What is included in the kit?
Each kit includes 2 x self-adhesive hangers (100x100mm), 2 x fibre 5mm bumpers, and 1 x alcohol wipe.
Are these hangers suitable for painted walls?
These hangers are best suited for non-porous, smooth surfaces like glass or acrylic. While they may adhere to very smooth, well-prepared painted walls, adhesion may be less reliable than on dedicated surfaces like glass or mirrors.
Troubleshooting
Hanger does not adhere properly.
Ensure the surface is thoroughly cleaned with the alcohol wipe and is completely dry before application. Reapply pressure for the recommended duration. Avoid touching the adhesive surface.
Item falls after being hung.
Verify that the item's weight does not exceed the 3.6kg limit per pair. Ensure the surface is suitable and the adhesive has been allowed to cure for at least 24 hours. Check for any environmental factors like high humidity or extreme temperatures.
Adhesive leaves residue upon removal.
Gently warm the adhesive with a hairdryer on a low setting, then slowly peel the plate away. Any remaining residue can usually be removed with a mild adhesive remover or rubbing alcohol, following product instructions.
Pros and Cons
Pros
- Easy and quick to install without tools.
- Adhesive backing avoids wall damage, ideal for renters or temporary displays.
- Works well on a variety of smooth, flat surfaces.
- Includes necessary preparation and protection materials.
- Suitable for displaying lightweight to moderately weighted items.
Cons
- Limited to a maximum weight of 3.6kg per pair.
- Requires a completely flat and smooth surface for optimal adhesion.
- Adhesive may not be suitable for all wall types or painted surfaces that are not perfectly smooth.
- Not designed for heavy or bulky items.
- Adhesion strength can be affected by humidity and temperature.
Setup, Compatibility & Care
Setup:
- Prepare the Surface: Ensure the surface where you intend to attach the plate (either the item to be hung or the wall) is completely clean, dry, and free of dust, grease, or any residue. Use the provided alcohol wipe for optimal cleaning.
- Position the Plate: Carefully peel off the protective backing from the adhesive side of the hanging plate.
- Apply Pressure: Align the plate with the desired location and press firmly for at least 30 seconds to ensure a secure bond. For best results, allow the adhesive to cure for at least 24 hours before hanging any weight.
Compatibility:
- Suitable Surfaces: Flat board, acrylic, glass, mirrors, and other smooth, non-porous surfaces.
- Hanging Method: Designed to be used with wall hooks, screws, or nails.
- Weight Limit: Maximum recommended weight of 3.6kg per pair of plates.
Care:
- Wipe the surfaces gently with a dry or slightly damp cloth if they become dusty. Avoid abrasive cleaners.
- Ensure the item remains within the weight limit to maintain adhesion strength.