Taskar Picture Hanging Plate Kit - Self Adhesive - 100x100mm - Silver

The maximum recommended weight for a pair of Taskar Picture Hanging Plates is 3.6kg.

No, these hangers are designed for smooth, flat, non-porous surfaces. They are not suitable for textured wallpaper or other porous materials.

Gently peel the hanger away from the surface. If any adhesive residue remains, it can typically be removed with a standard adhesive remover.

They work best on glass, acrylic, mirrors, and smooth, sealed, painted boards. The surface must be clean and degreased.

Yes, using both hangers in pairs is crucial for stability and to distribute the weight correctly. Do not use a single hanger to support an item.

Yes, each kit includes two 5mm fibre bumpers along with the two self-adhesive hangers and one surface preparation wipe.

These hangers are intended for indoor use. Exposure to moisture and varying temperatures may affect the adhesive's performance and longevity.

Ensure the surface was completely clean and degreased before application. Re-apply pressure for the recommended time. Check that the item's weight does not exceed the 3.6kg limit.

Check that both hangers are applied at the same height and are level with each other. Adjust the position of the bumpers on the artwork if necessary.

For particularly greasy surfaces, use a standard household degreaser and water mixture, followed by a clean water rinse and thorough drying, before using the supplied wipe for final preparation.

Ensure the bumpers are positioned correctly on the artwork to create a gap. Verify that the hangers themselves are installed straight and level.