Husqvarna Laminated Bar - .325" Mini PIXEL 1.1mm - 10" 46DL - 593914346

The Husqvarna Laminated bar features a gentle curve and a small nose radius that effectively reduc...

Best current price£30.99from Husqvarna

All Offers

10 offers from £30.99 - £63.00

View price history by clicking the chart icon.

HusqvarnaHusqvarna Laminated Bar .325” Mini Pixel 1.1Mm Sm
Free delivery in 1–3 days
£30.99
Visit shop
eBayHusqvarna X-Precision 14″ Laminated Bar .325” 1.1mm 593914359
Free delivery in 1–3 days
£35.00
Visit shop
Blueperry agriculture (UK)Husqvarna Guide Bar 12" 51Dl Sleeve .325" Mini 593914351
Free delivery in 1–3 days
£39.79
Visit shop

Product Information

Full details

The Husqvarna Laminated Bar (MPN 593914346) is a precision-engineered 10-inch guide bar designed for arborists and homeowners who prioritize cutting control and safety. Its key benefit is the reduced risk of kickback, achieved through a small nose radius and specialized sprocket design, making it ideal for detailed pruning and limbing tasks. However, users should note that this specific model uses a .325-inch mini pitch with 1.1mm gauge, meaning it must be paired with compatible low-profile chain components to function safely and effectively.

All features

Model Part Number593914346
BrandHusqvarna

Extended Product Information

FAQs

Does this bar fit all Husqvarna chainsaws?

No, it is specifically designed for systems using a .325-inch mini pitch. Verify your saw's manual for compatibility.

How many drive links does this bar require?

This bar requires a chain with exactly 46 drive links.

Can I use a standard 3/8-inch chain with this bar?

No, you must use a chain that matches the .325-inch pitch of the bar sprocket.

What is the benefit of the PIXEL design?

The PIXEL design features a narrower kerf, which reduces the amount of wood being cut, leading to faster cutting speeds and less strain on the chainsaw.

How often should I clean the bar groove?

It is recommended to clean the groove every time you sharpen your chain to ensure optimal oil flow.

Troubleshooting

Chain binds in the cut

Check that the chain tension is not too tight and verify that the chain is properly sharpened.

Excessive heat at the bar nose

Ensure the sprocket nose is spinning freely and the oil hole is not clogged with sawdust.

Rapid or uneven rail wear

Check for correct chain oil flow and ensure the bar is being flipped periodically during high-use periods.

Pros and Cons

Pros

  • Significantly improved control for pruning
  • High resistance to surface scratches and rust
  • Lightweight construction reduces operator fatigue
  • Small nose radius enhances safety during tip cutting

Cons

  • Limited to specific .325-inch mini pitch chains
  • Not suitable for heavy-duty felling or large-diameter wood
  • Requires exact matching with 46 drive links

Setup, Compatibility & Care

To ensure peak performance, verify your chainsaw powerhead is compatible with the .325-inch mini pitch system. Always check that your drive link count is exactly 46 before attempting installation.

  1. Installation: Ensure the chain tensioner is correctly seated in the adjustment hole of the bar.
  2. Tensioning: Tighten the chain so it is snug against the bar bottom but still moves freely by hand when the brake is off.
  3. Lubrication: Maintain a clean oil reservoir and check that the oiler port aligns with the bar to keep the sprocket nose properly lubricated.
  4. Maintenance: Periodically flip the bar to ensure even wear on both rails. Clean the bar groove with a specialized tool to remove debris that may block oil flow.

Similar items

Price History

DatePrice
Visit shop