Husqvarna Laminated Guide Bar - 5 inch - 1/4 inch - 1.1mm

Name: Husqvarna Laminated Guide Bar - 5 inch - 1/4 inch - 1.1mm
Brand: Husqvarna
SKU: 2vvw3xk5yf
Availability: InStock

The Husqvarna 1/4 inch Pixel Mini guide bar is designed specifically for pruning tasks with the Hu...

Best current price£15.99from Husqvarna

Best offers

Shopping.co.uk recommended and popular offers

Lowest price

Husqvarna£15.99Visit shop

Husqvarna Laminated Bar 1/4” Mini Pixel 1.1Mm

Visit shop

All Offers

2 offers from £15.99 - £19.99

View price history by clicking the chart icon.

HusqvarnaHusqvarna Laminated Bar 1/4” Mini Pixel 1.1Mm

Free delivery in 1–3 days

£15.99

Visit shop

eBayHusqvarna Laminated bar 1/4” mini PIXEL 1.1mm

Free delivery in 1–3 days

£19.99

Visit shop

Product Information

Full details

The Husqvarna 5-inch Pixel Mini Guide Bar is an essential component for arborists and homeowners who utilize the Husqvarna Aspire Pruning Saw for detailed, precision tree maintenance. Designed with a slim profile and thin gauge, it provides the agility needed for tight spaces, though users should note it is strictly compatible with 1/4-inch mini, 1.1mm gauge chains, limiting its versatility for heavy-duty timber work.

All features

Model Part Number	536911832
Brand	Husqvarna

Extended Product Information

FAQs

Can I use this bar on a larger gas-powered chainsaw?

No, this bar is designed specifically for the Husqvarna Aspire system and small-scale pruning; it is not compatible with standard gas chainsaw mounts.

What is the recommended chain for this bar?

You should use the Husqvarna X-PRECISION SP11G 1/4-inch 1.1mm semi-chisel chain.

How long will the bar last?

Lifespan depends on maintenance. Keeping the groove clean and the chain properly tensioned will significantly extend its life.

Does this bar require special oil?

Use high-quality chainsaw bar oil compatible with Husqvarna electric saws to ensure the bar and chain remain properly lubricated.

Can I sharpen the chain while it is on the bar?

Yes, you can use a file with the correct diameter for the 1/4-inch pitch chain to maintain sharpness while the chain is mounted.

Troubleshooting

Chain jumping off the bar

Check chain tension; the chain should be snug but pull easily by hand. Ensure the bar groove is free of debris.

Excessive heat at the bar nose

Verify that the bar is receiving adequate oil flow and that the chain is not over-tightened.

Uneven cut lines

Inspect the bar rails for burrs or uneven wear. File the rails flat if necessary or replace the chain if cutters are dull on one side.

Pros and Cons

Pros

Extremely lightweight for prolonged overhead use
High-precision cutting suitable for delicate branches
Reduced friction for longer battery life on electric saws
Durable construction resistant to bending

Cons

Not suitable for heavy-duty felling or bucking
Limited to 1/4-inch pitch chains only
Narrow gauge requires precise chain tensioning

Setup, Compatibility & Care

To ensure peak performance, follow these guidelines for installation and maintenance:

Installation: Remove the side cover of your Aspire saw and align the bar studs with the mounting holes. Ensure the oil port is clear and unobstructed.
Compatibility: This bar is explicitly engineered for the Husqvarna Aspire Pruning Saw and the X-PRECISION SP11G 1/4-inch mini chain.
Tensioning: Due to the thin 1.1mm gauge, monitor chain tension frequently. A loose chain may jump the groove, causing premature wear to the bar rails.
Care: Clean the bar groove after every use with a dedicated tool to prevent sap and wood chip buildup. Lubricate the nose sprocket periodically if the design allows for it.