Husqvarna X-Force Pro Laminated Bar - 0.325" 1.5mm

Name: Husqvarna X-Force Pro Laminated Bar - 0.325" 1.5mm
Brand: Husqvarna
SKU: 7kiwjdhsbh
Availability: InStock

More durability, less weight and superior performance – the Husqvarna X-Force guide bars have been...

Best current price£22.95from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

eBay£22.95Visit shop

Husqvarna XForce Chainsaw Guide Bar 13"" .325 058 for 545 555 550 560xp 582086956

Visit shop

Trusted

B&Q£49.99Visit shop

B&Q - X-Force Pro Laminated Bar 0.325" 1.5mm 13"

Visit shop

All Offers

20 offers from £22.95 - £81.43

View price history by clicking the chart icon.

eBayHusqvarna XForce Chainsaw Guide Bar 13"" .325 058 for 545 555 550 560xp 582086956

£3.55 delivery

£22.95

Visit shop

B&QB&Q - X-Force Pro Laminated Bar 0.325" 1.5mm 13"

Free delivery in 1–3 days

£49.99

Visit shop

HusqvarnaHusqvarna X-Force Pro Laminated Bar 0.325" 1.5Mm

Free delivery in 1–3 days

£51.99

Visit shop

Blueperry agriculture (UK)Husqvarna Guide Bar X-Force 13" .325" 1.5Mm H30 582086956

Free delivery in 1–3 days

£63.31

Visit shop

Product Information

Full details

The Husqvarna X-Force Pro Laminated Bar is designed for professional chainsaw users seeking enhanced durability, reduced weight, and superior cutting performance. Developed in conjunction with X-Cut chains, it ensures maximum efficiency. Its smooth profile, robust nose and bearing system, and optimized center plate minimize downtime, though users should ensure proper chain tension for optimal results.

All features

Model Part Number	582086966
Brand	Husqvarna

Extended Product Information

FAQs

What is the primary benefit of the X-Force Pro Laminated Bar?

The primary benefit is the combination of enhanced durability and reduced weight, leading to superior performance and less user fatigue.

What chain pitch and gauge is this bar compatible with?

This bar is compatible with 0.325" pitch chains and a 1.5mm gauge.

How often should I check chain tension?

Chain tension should be checked frequently, especially during initial use of a new chain and after every few cuts, as chains can stretch.

Can I use this bar on any chainsaw?

No, this bar is designed for specific Husqvarna models and requires compatible chain pitch and gauge. Always verify compatibility with your chainsaw model.

How do I clean the guide bar?

After each use, clean the bar groove and oiler holes with a brush and mild solvent to remove sawdust and debris.

What is the warranty period for this bar?

Warranty information is typically provided by the retailer at the time of purchase and depends on the specific terms and conditions of Husqvarna and the seller.

Is it recommended to use X-Cut chains with this bar?

Yes, the X-Force Pro Laminated Bars are developed in conjunction with X-Cut chains to achieve the best possible performance.

Troubleshooting

Chain is not cutting straight

Check chain sharpness and ensure even wear. Verify the guide bar is not bent and that chain tension is correct. Ensure the bar is properly seated on the saw.

Chain is sluggish or binding

Ensure adequate lubrication and check chain tension. Clean the bar groove and oiler holes. Check for debris in the sprocket nose or around the drive sprocket.

Excessive wear on one side of the bar

Flip the guide bar over regularly to promote even wear. Ensure chain tension is correct and lubrication is adequate.

Bar nose is overheating

Check the sprocket nose for wear or damage. Ensure the bearing in the nose is spinning freely and is adequately lubricated. Increase lubrication flow if possible.

Pros and Cons

Pros

Enhanced durability for professional use.
Reduced weight leads to less user fatigue.
Superior cutting performance when paired with X-Cut chains.
Designed for minimal downtime and maximum productivity.
Smooth, optimized profile for efficient cutting.

Cons

Requires precise chain tension for optimal performance.
May be an investment for non-professional users.
Specific chain pitch (0.325") and gauge (1.5mm) compatibility is essential.

Setup, Compatibility & Care

Compatibility: This guide bar is specifically designed for Husqvarna chainsaws and is compatible with 0.325" pitch chains and a 1.5mm gauge. Always verify your chainsaw's specifications to ensure correct fitment. Refer to your chainsaw's manual or consult with a Husqvarna dealer for confirmation.

Setup:

Ensure the chainsaw is off and the spark plug is disconnected for safety.
Remove the old guide bar and chain.
Clean the mounting area on the chainsaw.
Mount the new X-Force Pro Laminated Bar, ensuring it sits flush against the mounting studs.
Install the X-Cut chain, ensuring it is correctly routed around the bar and sprocket.
Adjust chain tension according to your chainsaw's manual. The chain should be snug but still able to be pulled by hand around the bar. It should 'snap' back slightly when pulled away from the bar.
Reinstall the chain brake and cover.
Connect the spark plug and test the chain brake before cutting.

Care:

Lubrication: Ensure the oiler is functioning correctly and the bar groove is adequately lubricated during use. Use high-quality bar and chain oil.
Tension: Regularly check and adjust chain tension. A loose chain can derail and damage the bar and saw; a too-tight chain increases wear on the bar, chain, and sprocket.
Cleaning: After each use, clean the bar groove, oiler holes, and sprocket nose with a brush and mild solvent to remove sawdust and debris.
Inspection: Periodically inspect the bar for wear, damage, or burrs. Flip the bar over regularly to ensure even wear on both sides. Replace the bar if the rails are significantly worn or damaged.