Best current price£2.72from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£2.72Visit shop Floplast Anthracite/Grey Deepflow/ Hi-Cap Gutter Fascia Bracket - 115Mm X 75Mm
Visit shop
B&Q£13.26Visit shop B&Q - Deepflow Hi-Cap Fascia Bracket 115mm X 75mm Anthracite GreyUpvc
Visit shop3 offers from £2.72 - £13.26
View price history by clicking the chart icon.
The FloPlast Deepflow Hi-Cap Gutter Fascia Bracket is designed for homeowners and contractors seeking a reliable, heavy-duty support system for high-capacity guttering installations. It offers a secure, snap-in installation method that streamlines the mounting process while providing a sleek, modern finish in Anthracite Grey; however, installers must carefully calculate spacing intervals based on local weather conditions to ensure long-term structural integrity.
| Model Part Number | RKH1AG |
|---|---|
| Brand | FloPlast |
The standard spacing is 1 meter, but this should be reduced to 400mm-800mm in areas with heavy snowfall.
No, these are specifically designed for the FloPlast Deepflow and Hi-Cap gutter systems.
You will need a drill/driver and two countersunk screws for each bracket.
They are finished in a durable Anthracite Grey, and painting is not recommended as it may affect the finish or the locking mechanism.
Gently pull the front edge of the bracket outward to release the gutter's front rim, then lift the gutter out of the rear clip.
Ensure the front edge of the gutter is fully clicked into the locking mechanism and check that the fascia screws are tightened flush.
The spacing between brackets likely exceeds 1 meter. Add additional brackets to decrease the distance between supports.
Verify that the bracket is not mounted at an angle and that the gutter profile is aligned correctly with the rear clip before applying pressure.
Installation requires only basic hand tools and two countersunk screws per bracket. Begin by identifying the desired fall of the guttering to ensure proper water drainage towards the downpipe. Once the brackets are aligned, screw them directly into the fascia board. To install the gutter, hook the rear section of the gutter into the rear clip of the bracket and apply downward pressure on the front edge until it locks. These brackets are compatible exclusively with the FloPlast Deepflow and Hi-Cap gutter ranges. Maintenance is minimal; periodic cleaning of the gutter system to remove leaves and debris will keep the bracket connection secure. Inspect the screws annually to ensure they remain tight and free from corrosion.
Polypipe Half Round Fascia Bracket - 112mm - Black - RR109BFrom £3
FloPlast Fascia Bracket - BrownFrom £3
Fascia Bracket - FloPlastFrom £3
Polypipe 117mm Gutter Fascia Bracket - White - RD509WFrom £4
FloPlast Miniflo Gutter Fascia Bracket - 76mm - Anthracite GreyFrom £3
Wavin Osma DeepLine Gutter Support Bracket - 113mm - Black - 9T919BFrom £5
Polypipe 117mm Polyflow Fascia Bracket - Black - RD509BFrom £4
FloPlast Xtraflo Industrial Fascia Bracket - 170mm - GreyFrom £6
FloPlast Half Round Gutter Fascia Bracket - 75mm - GreyFrom £3
FloPlast Cast Iron Effect Half Round Gutter Fascia Bracket - 112mmFrom £4
FloPlast Half Round Gutter Fascia Bracket - 112mm GreyFrom £2
FloPlast Fascia Bracket - Black - Half RoundFrom £2