FloPlast Xtraflo Industrial Fascia Bracket - 170mm - Grey

No, these are specifically designed for the FloPlast Xtraflo industrial range and are not compatible with standard domestic gutter profiles.

Brackets should be spaced at intervals no greater than 600mm to ensure the system can support heavy rain and snow loads.

It is recommended to use 7 brackets for every 4-meter length of guttering.

While the grey finish is durable, if you choose to paint them, ensure you use a plastic-adhesion primer designed for PVC components.

You should use high-quality, corrosion-resistant countersunk screws suitable for your specific fascia board material (e.g., stainless steel or galvanized).

Check that the bracket is not bent and that the gutter is fully engaged in the rear clip before pulling down the front edge.

Verify that you are using high-quality countersunk screws and that the fascia board is not suffering from wood rot or damage.

Increase the number of brackets to decrease the distance between supports; ensure you are not exceeding the 600mm interval maximum.