Eastwood Extreme Chassis/Suspension Paint - 397g Aerosol - Gloss Black

It is designed for protecting and enhancing vehicle underbodies, axles, suspension arms, and crossmembers against corrosion, chips, and scratches.

It is formulated to be 3 times more durable than Eastwood's original chassis black, offering superior resistance to wear and tear.

No, the surface must be clean and free from rust. For best results, remove all rust, degrease the surface, and consider applying an Eastwood primer before painting.

The paint can withstand temperatures up to 300°F, making it suitable for components that experience moderate heat.

One 397g aerosol can provides up to 8 sq. ft. of coverage, offering significantly more coverage than many comparable aerosol paints.

The gloss version provides a shiny, reflective finish, while the satin version is designed to closely match the appearance of Original Equipment (OE) chassis paints, offering a non-reflective or low-sheen look.

While designed for underbody and chassis parts, it can be used on interior metal components that require durable protection, provided proper ventilation during application and curing.

Ensure the can is held at the correct distance and moved steadily. If sputtering persists, the nozzle may be clogged. Try clearing it by spraying upside down for a few seconds or gently cleaning the nozzle with a solvent and pin.

This is usually caused by applying the paint too thickly or holding the can too close to the surface. Apply in thinner, multiple coats and maintain proper distance. Allow adequate flash-off time between coats.

Surface preparation was likely inadequate. Ensure the surface was clean, dry, and properly primed or sanded before application. Remove the affected paint, re-prepare the surface, and reapply.

While this paint offers good coverage, extreme texture or very heavy coats can reduce it. Ensure even application and maintain the recommended spray distance. For very rough surfaces, a second can might be needed.