Siramico Coatings One Coat Anti-Slip Floor Paint, 1 Litres - Black

This paint is suitable for concrete, stone, brick, and wood surfaces. Always ensure the surface is properly prepared.

The paint typically dries in 1-4 hours at 20°C. However, full curing may take longer depending on conditions.

Yes, the formula is non-toxic, VOC-free, and odorless, making it safe for indoor use.

While the paint is designed for direct application, priming is recommended for highly porous or uneven surfaces to ensure optimal adhesion and a uniform finish.

The product is designed for application with a brush or roller due to its consistency. Spray application is not recommended without specific testing and potential thinning.

Clean up spills immediately with a damp cloth. Tools should be cleaned with water and mild detergent before the paint dries.

It is designed as a 'One Coat' product for many applications. However, a second coat can be applied for increased durability or a more opaque finish, ensuring the first coat is dry to the touch.

Ensure the surface was thoroughly cleaned and free of dust, grease, or old coatings. Surface preparation may need to be more rigorous, involving light abrasion or a suitable primer.

Stir the paint more frequently during application. Use a high-quality roller or brush designed for floor paints. Apply in thin, even coats, and avoid overworking the paint.

Work in smaller sections. Consider applying during cooler parts of the day. A paint extender or retarder suitable for water-based paints might be used sparingly, though this can affect drying times.

Ensure the temperature and humidity levels are within the recommended range for drying. Poor ventilation can also slow drying. Increase air circulation and check for environmental conditions that might be impeding the drying process.