Auto Extreme All Purpose Automotive Spray Paint - 250ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 250ml aerosol can of Auto Extreme All Purpose Automotive Spray Paint is designed for users seeking a reliable clear lacquer coat for automotive applications. Its key benefit is excellent coverage and adhesion, allowing for quick and easy application with minimal energy loss. A potential consideration is that it's a clear coat, so results will depend on the underlying surface preparation and color.
All features
| Model Part Number | 1905 |
|---|---|
| Brand | Auto Extreme |
| Container Volume | 250ml |
Extended Product Information
FAQs
How many coats of clear lacquer should I apply?
Typically, 2-3 light, even coats are recommended for best results. Allow adequate flash-off time between coats as per product recommendations.
Can this be used on plastic parts?
Yes, this clear coat is suitable for most automotive plastic parts, provided they are clean, dry, and properly prepared. Testing on a small area is advised.
What is the drying time?
Drying times vary based on temperature and humidity. It is usually touch-dry within 10-20 minutes, and ready for recoating in 30-60 minutes. Full cure may take longer.
Does this paint add color?
No, this is a clear lacquer coat and does not add color. It provides a protective, glossy finish over existing paint or primer.
How do I clean the spray nozzle if it gets blocked?
After use, turn the can upside down and spray for a few seconds to clear the nozzle. If a blockage persists, you can try soaking the nozzle in a suitable solvent like lacquer thinner, then rinse and dry before reattaching.
Is this product suitable for engine bays?
While it offers good adhesion and durability, it is primarily designed for cosmetic finishes. For high-heat areas within an engine bay, specialized high-temperature coatings may be more appropriate.
Troubleshooting
Uneven spray or sputtering
Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, try cleaning it by inverting the can and spraying until clear.
Runs or drips
Apply in thin, even coats rather than one heavy coat. Maintain a consistent distance from the surface (typically 25-30 cm). Reduce spray pressure or speed.
Poor adhesion
Ensure the surface was properly cleaned and prepared before application. Remove any contaminants like oil or wax. Reapply after thorough surface preparation.
Product dries cloudy or dull
This can occur in humid conditions or if applied too thickly. Ensure proper ventilation and apply in light coats. Avoid spraying in very high humidity.
Pros and Cons
Pros
- Offers a durable clear protective layer.
- The aerosol format makes application simple and fast.
- Suitable for a wide range of automotive touch-up needs.
- Good adhesion ensures the finish lasts.
- Versatile for both interior and exterior automotive applications.
Cons
- Requires proper surface preparation for best results.
- Being a clear coat, it is not a color-matching solution on its own.
- May require multiple light coats for optimal finish.
- Aerosol cans can be less eco-friendly than traditional paint systems.
- Performance may vary based on application conditions (temperature, humidity).
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the surface is clean, dry, and free from grease, wax, and rust. Lightly sand the area if necessary and wipe with a tack cloth.
- Environment: Use in a well-ventilated area, ideally between 15-25°C (59-77°F). Protect surrounding areas from overspray.
- Shaking: Shake the can vigorously for at least two minutes before use to ensure the contents are thoroughly mixed.
Compatibility:
This clear lacquer coat is designed for automotive applications and is generally compatible with most automotive primers and existing paint finishes. Always test on an inconspicuous area first if unsure.
Care:
- After use, invert the can and spray for a few seconds to clear the nozzle.
- Store in a cool, dry place away from direct sunlight and heat.
- Keep out of reach of children.