Johnstone's Wood & Metal Paint - Black Satin - 750ml

Johnstone's Satin Paint is suitable for interior wood and metal surfaces, including beams, panelling, doors, and decorative ironwork.

Two coats are recommended for full coverage and the best results. Allow sufficient drying time between coats.

Ensure the surface is clean, dry, and free from loose paint, rust, grease, or wax. Lightly sand the surface to create a key for the paint.

No, this paint is specifically designed for interior use only.

Clean brushes and equipment with the appropriate solvent immediately after use.

Drying time varies depending on environmental conditions. Refer to the product label for specific drying times.

A primer is not always necessary, but it may be beneficial on certain surfaces or when changing colours significantly. Always test in an inconspicuous area.

Ensure the surface is clean, dry, and properly prepared. Sand the surface to create a key and apply a suitable primer if necessary.

Apply the paint in even coats, avoiding thick layers. Ensure the brush or roller is suitable for the surface and paint type.

Ensure proper ventilation and maintain a suitable temperature during the drying process. Avoid applying too thick a coat of paint.