Ronseal Diamond Hard Clear Satin Wood Varnish - 250ml
This clear interior varnish from the Ronseal Interior Diamond Hard range is suitable for interior ...This clear interior varnish from the Ronseal Interior Diamond Hard range is suitable for interior wood surfaces and can be applied using a brush. It dries to the touch in just 20 minutes and provides coverage of up to 24 m² per litre on average. The water-based formula offers a rapid drying time and is easier to apply than traditional oil-based varnishes. Its Diamond Hard protection creates a tough and durable barrier that shields woodwork from everyday knocks and scuffs, ensuring a long-lasting, beautiful finish.
This guide is for anyone looking to protect and enhance their interior wood surfaces with Ronseal Diamond Hard Clear Satin Wood Varnish. It offers a durable, satin finish that dries quickly, providing excellent protection against wear and tear. Keep in mind that proper surface preparation is crucial for optimal results.
All features
Colour
White
Model Part Number
36870
Brand
Ronseal
Extended Product Information
FAQs
How many coats of varnish should I apply?
Apply at least two coats for optimal protection and appearance. For high-wear areas, consider applying a third coat.
Can I use this varnish on exterior wood?
No, this varnish is designed for interior use only. Using it outdoors may cause it to fail.
How do I prepare the wood surface before varnishing?
Clean the wood, remove any existing finish, sand the surface lightly to create a key, and ensure it's dry and free of dust.
What kind of brush should I use?
Use a high-quality brush suitable for applying varnish. A synthetic brush is often recommended for water-based varnishes.
How long does it take for the varnish to dry?
The varnish dries in approximately 20 minutes, but it's best to wait a bit longer between coats.
How much area does one can of varnish cover?
One litre will cover up to 24 m² on average.
Can I apply this varnish over a painted surface?
No, this is a varnish, not a paint. It should be applied to bare wood for best results.
Troubleshooting
Varnish is not drying properly.
Ensure the room is well-ventilated and the temperature is within the recommended range. Check for excessive humidity. Make sure the applied coat is thin.
The finish is uneven or patchy.
Ensure the surface is properly prepared by sanding. Apply thin, even coats, and avoid over-brushing. Sand lightly between coats.
Brush strokes are visible.
Use a high-quality brush and apply the varnish evenly. Lightly sand the surface after each coat to smooth out any imperfections.
Varnish is peeling or flaking.
Ensure the surface is thoroughly cleaned and degreased. Lightly sand the surface before applying the varnish. Make sure to apply it in a well-ventilated area.
Pros and Cons
Pros
Durable, long-lasting protection for interior wood surfaces.
Quick drying time minimizes project downtime.
Easy to apply with a brush.
Satin finish provides an attractive, low-sheen appearance.
Good coverage rate, offering value for money.
Cons
Requires proper surface preparation for best results.
May require multiple coats for optimal protection and appearance.
Coverage can vary depending on the wood type and application method.
Color may vary slightly depending on the wood type.
Not suitable for exterior use.
Setup, Compatibility & Care
Setup:
Preparation: Ensure the wood surface is clean, dry, and free from any existing varnish, wax, or grease. Lightly sand the surface to create a key for the varnish.
Application: Stir the varnish thoroughly before use. Apply a thin, even coat using a brush, following the grain of the wood.
Drying: Allow the first coat to dry for 20 minutes before applying subsequent coats.
Coats: Apply at least two coats for optimal protection and appearance. Lightly sand between coats.
Clean Up: Clean brushes with water.
Compatibility:
Suitable for use on most interior wooden surfaces.
Not recommended for exterior use.
Test on a small, inconspicuous area first to check for compatibility and desired finish.
Care:
Clean the varnished surface with a damp cloth and mild detergent.
Avoid abrasive cleaners or harsh chemicals that could damage the finish.
Protect surfaces from extreme temperatures and direct sunlight.
Power Tools Direct£6.52Visit shop 
The Range£11.84Visit shop 
eBay£12.64Visit shop 
