Ronseal Yacht Varnish - Satin - 1L

On average, 1 litre will cover up to 16 m².

It takes approximately 4 hours to dry.

While suitable for exterior use, it can be used on interior wood, but the product is optimised for outdoor conditions.

The surface should be clean, dry, and free of any old coatings, dirt, or grease. Light sanding may be required.

Apply at least two coats for optimal protection.

Store the tin in a cool, dry place and reseal it tightly.

Clean brushes immediately after use with a brush cleaner suitable for oil-based products.

Ensure the surface is clean and dry. Check the temperature and humidity levels, as this can affect drying times. Ensure adequate ventilation.

Apply thinner coats and avoid over-brushing. Ensure the brush is not overloaded with varnish.

Sand the surface lightly between coats to remove any imperfections. Apply an even coat of varnish.