Burbage Iron Craft Quoro Wooden Driveway Garden Gates - 2400mm Wide X 900mm High - Qud10
These driveway gates are made from European-managed forest Scandinavian Redwood. Measurement in to...These driveway gates are made from European-managed forest Scandinavian Redwood. Measurement in total is 2400mm Wide (94.5") x 900mm High (35.5"). The frame is 70x70mm, the bracing is 70x54mm & 95x14mm and the tongue and groove boards are 95x14mm. Pressure Treatment applied with a general-purpose preserver which gives protection against decay, mould and blue-staining fungi, should still have final finish applied after fitting.Note: All timber gate sizes are subject to slight variation due to normal shrinkage/expansion. The preserver is not a 100% decay guarantee, so it remains the end users responsibility to periodically inspect the gate. The gate will need to be re-treated at a future date to ensure long life, this will be subject to many factors such as weather conditions and amount of use etc. The gate boasts a balustrade feature at the upper part and features interlocking tongue and groove boards to ensure sturdiness and durability. All wooden gates and posts by Burbage Iron Gates are made from Scandinavian Redwood from managed forests. They are treated with a general-purpose preserver to protect them against rot and decay. For orders over a quantity of 10 further delivery charges may apply.
This guide helps homeowners understand and effectively use the Burbage Iron Craft Quoro Wooden Driveway Gate (2400mm Wide x 900mm High). These gates offer a sturdy and attractive entryway to your property, constructed from Scandinavian Redwood. Keep in mind that while the wood is pressure-treated, regular maintenance is essential to ensure longevity.
All features
Colour
Blue
Model Part Number
Qud10
Brand
Burbage Iron Craft
Extended Product Information
FAQs
What is the gate made of?
The gate is made from Scandinavian Redwood from managed forests.
Is the wood treated?
Yes, the wood is pressure-treated with a general-purpose preserver to protect against rot and decay.
How often should I re-treat the gate?
Re-treat the gate every 1-3 years, depending on weather conditions and use.
What kind of maintenance does the gate require?
Regular cleaning with mild soap and water, periodic inspection, and re-treatment with a wood preserver.
What are the dimensions of the gate?
The standard gate is 2400mm Wide x 900mm High, but other sizes are available.
What if my gate arrives damaged?
Contact the seller immediately with photos of the damage for assistance.
Where is the timber sourced?
The timber is sourced from European-managed forests.
What about orders of over 10 gates?
Additional delivery charges may apply for orders over 10 units. Contact customer service for details.
Troubleshooting
Gate is difficult to open or close.
Check the hinges for any obstructions. Lubricate the hinges with a suitable lubricant. Ensure the gate is correctly aligned.
Wood appears to be deteriorating.
Clean the affected area and re-treat the wood with a wood preserver. Check for and address any water damage.
Gate sags or is misaligned.
Tighten or replace any loose or damaged hardware. Check the posts for stability and adjust as necessary.
The gate does not fit the opening.
Double-check the measurements of the opening and the gate. Contact customer service if there's a discrepancy.
Pros and Cons
Pros
Durable and long-lasting when properly maintained.
Attractive design enhances curb appeal.
Made from sustainably sourced materials.
Pressure-treated for added protection against the elements.
Available in multiple sizes for different driveway widths.
Cons
Requires periodic inspection and re-treatment to maintain the wood's integrity.
Subject to slight size variations due to natural wood characteristics.
Additional delivery charges may apply for orders over 10 gates.
Preserver is not a 100% decay guarantee.
Setup, Compatibility & Care
Installation: The gate should be installed by a qualified professional to ensure proper alignment and function. Ensure posts are correctly set for the gate's weight and size.
Compatibility: Designed for standard driveway openings. Ensure the gate's width matches your opening size.
Care:
Inspect the gate regularly for signs of wear, such as rot, warping, or loose components.
Clean the gate periodically with a mild soap and water solution.
Re-treat the gate with a wood preserver every 1-3 years, depending on the weather conditions and amount of use. Follow the manufacturer's instructions for the wood preserver.
Address any minor issues immediately to prevent them from becoming more significant problems.
Important Note: The gate's longevity is dependent on proper installation and ongoing maintenance.