Best current price£53.14from The Range
Shopping.co.uk recommended and popular offers
The Range£53.14Visit shop Jcp Construction Products Shield Anchors Loose Bolt Zyp - M10 X 110/50Mm (Box Of 70) - White
Visit shop5 offers from £53.14 - £58.33
View price history by clicking the chart icon.
The JCP Construction Products Shield Anchors Loose Bolt ZYP (M10 x 110/50mm) are essential heavy-duty fasteners designed for contractors and DIY enthusiasts who require secure, permanent anchoring in solid masonry or concrete substrates. These anchors offer a robust, high-performance grip thanks to their effective expansion mechanism, providing a dependable solution for mounting structural components or heavy fixtures. While they excel in durability and ease of installation, users should note that they are specifically intended for dense materials and are not suitable for hollow brick or lightweight blockwork where expansion may be compromised.
| Colour | Bronze |
|---|---|
| Model Part Number | 1427607 |
| Brand | JCP CONSTRUCTION PRODUCTS |
No, shield anchors rely on expanding against solid material. They will fail to grip in hollow or aerated blocks.
Typically, you should use a drill bit that matches the external diameter of the shield sleeve. Consult your specific project engineering guide for exact tolerances.
The ZYP coating provides a good level of corrosion resistance, but for coastal or highly corrosive environments, stainless steel alternatives may be preferable.
Each pack contains 70 units of the M10 x 110/50mm anchors.
Generally, no. Once the shield is expanded, it is permanently deformed and should be replaced for safety reasons.
The hole is likely too large or the masonry is too soft. Check the drill bit size and ensure the substrate is dense enough for the anchor type.
Ensure the hole is free of dust and debris by blowing it out. Verify that the hole depth is sufficient for the 110mm length.
To ensure maximum safety, always drill the hole to the exact depth and diameter required for an M10 bolt. Use a hammer drill for concrete surfaces and ensure all debris is cleared from the hole before insertion. For maintenance, while the ZYP coating is protective, ensure that bolts are not exposed to excessive standing water or highly acidic conditions that could degrade the finish over time. Periodically check that the bolts remain torqued to the correct specification, as minor settling can occur in new structures.
