Best current price£52.15from The Range
Shopping.co.uk recommended and popular offers
The Range£52.15Visit shop Jcp Construction Products Shield Anchors Loose Bolt Zyp - M8 X 60/10Mm (Box Of 130) - White
Visit shop23 offers from £52.15 - £89.34
View price history by clicking the chart icon.
The JCP Construction Products Shield Anchors Loose Bolt ZYP (M6 x 70/25mm) are designed for professional contractors and dedicated DIY enthusiasts who require a reliable, heavy-duty fastening solution for structural applications. These anchors offer exceptional holding strength and a straightforward installation process, making them perfect for securing fixtures into solid base materials. A key caveat to note is that they are specifically engineered for appropriate masonry or concrete substrates, and users must ensure the correct pilot hole diameter is drilled to achieve the intended expansion and secure fit.
| Colour | White |
|---|---|
| Model Part Number | M6 X 70/25mm |
| Brand | JCP CONSTRUCTION PRODUCTS |
The ZYP finish offers good corrosion resistance, making them suitable for most outdoor settings, though they should be avoided in marine environments or highly acidic conditions.
Yes, but they perform best in solid, high-density brick. Avoid using them in hollow or lightweight aerated blocks.
Typically, you should use a masonry bit that matches the outer diameter of the shield anchor to ensure a secure fit.
The shell is intended for a permanent, one-time fix, but the bolt can technically be unscrewed if the fixture needs to be removed.
ZYP stands for Zinc Yellow Passivated, a coating process that helps prevent rust and improves the durability of the metal.
Yes, provided the substrate is sound concrete and the loads are within the rated limits of an M6 anchor.
The drill hole is likely too wide; ensure the bit size matches the anchor specification exactly.
Clear all dust and debris from the drilled hole, as trapped particles can prevent proper expansion.
Use a depth gauge on your drill to ensure you are reaching the required 70mm depth consistently.
To install, ensure the substrate is solid concrete or stone. Using a masonry drill bit, create a hole deep enough to accommodate the full length of the shield. Once the anchor is seated, use a standard wrench to tighten the bolt head. Care should be taken not to overtighten, as this could damage the threads or compromise the integrity of the substrate. Periodically inspect fasteners for any signs of loosening in high-vibration environments. Keep the anchors in a dry, cool environment to maintain the integrity of the ZYP finish.
