TIKKURILA Valtti Opaque Exterior Wood Paint - Paper F497

It is designed for exterior wood surfaces including timber cladding, wood facades, fences, doors, and sheds.

When used as part of a full system with Tikkurila Ultra Primer, Valtti Opaque can protect exterior wood surfaces for up to 15 years.

While it provides durable protection, it is not specifically recommended for surfaces in direct, prolonged contact with the ground or water. For decking, specific decking stains or treatments might be more suitable.

Clean tools with water immediately after use. For the painted surface, use a soft cloth or sponge with mild detergent and water. Avoid abrasive cleaners.

Valtti Opaque can be tinted to many colours. It is recommended to have it tinted at the point of purchase to ensure accuracy. Stir well after tinting and before application.

The paint is typically dry to the touch in 2-4 hours. Recoating can be done after the first coat is dry, again depending on ambient temperature and humidity.

It is a water-based, Low-VOC (Volatile Organic Compounds) formula, which means it has a lower odour and a better environmental profile compared to many solvent-rich alternatives.

Ensure the surface was properly prepared, clean, dry, and free of contaminants. If applying to bare or weathered wood, ensure Tikkurila Ultra Primer was used as recommended.

Ensure the paint was stirred thoroughly and applied evenly with consistent brush strokes. Avoid overworking the paint. Apply in suitable environmental conditions (temperature and humidity).

This may indicate insufficient surface preparation, application in poor conditions, or the absence of the recommended primer system on bare wood. Ensure flexibility of the wood was considered.

Ensure the paint was adequately stirred, especially if tinted. Colours can appear differently on various wood types and under different lighting conditions. Test in an inconspicuous area if unsure.