Best current price£100.61from B&Q
Shopping.co.uk recommended and popular offers
B&Q£100.61Visit shop B&Q - Valtti Opaque Exterior Wood PaintWeatherproof Semi Matt For FencesShedsCladding & Doors 3L Midnight Y498
Visit shop2 offers from £100.61 - £306.11
View price history by clicking the chart icon.
TIKKURILA Valtti Opaque Exterior Wood Paint is designed for homeowners and professionals seeking durable, long-lasting protection for exterior wood surfaces like cladding, fences, and doors. Its key benefit is superior weather resistance, offering up to 15 years of protection when used with Tikkurila Ultra Primer. A minor caveat is that optimal results and longevity are dependent on proper surface preparation and primer application.
| Colour | Black |
|---|---|
| Model Part Number | Y498 |
| Brand | Tikkurila |
When used as part of a full system with Tikkurila Ultra Primer, Valtti Opaque can protect exterior wood surfaces for up to 15 years.
Yes, provided the existing finish is sound and well-adhered. Clean the surface thoroughly, degrease, and lightly sand. If the existing finish is a solvent-based product, apply a suitable primer before using Valtti Opaque.
For best results, apply with a brush for optimal coverage, especially on detailed areas. A roller can be used for larger flat surfaces. Spray application is also an option.
Valtti Opaque is primarily designed for vertical surfaces like cladding, fences, and doors. For decking, Tikkurila recommends specific decking oils or stains that offer better resistance to foot traffic and horizontal wear.
Clean tools and spills immediately with water. For the painted surface, use a soft brush or cloth with a mild detergent solution. Rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
Coverage varies depending on the surface porosity and application method, but typically one liter covers approximately 5-10 square meters per coat.
Yes, Valtti Opaque can be tinted to thousands of shades. While you can mix it with other Valtti Opaque tints, it is not recommended to mix it with other types of paint or different product lines.
Ensure the surface was clean, dry, and properly primed. Re-sand lightly if necessary and reapply primer and paint.
Stir paint thoroughly before and during application. Ensure consistent application technique with brush or roller. Apply a second coat if needed.
This usually indicates poor surface preparation or inadequate priming. Ensure wood is dry and free from contaminants. Re-prepare the surface and reapply the system.
Drying times are dependent on temperature and humidity. Ensure application conditions are within the recommended range. Avoid application in very cold or humid weather.
Setup: For best results on bare or weathered wood, begin by preparing the surface. Clean the wood thoroughly to remove dirt, grease, and old flaking paint. Apply Tikkurila Ultra Primer to bare or weathered wood. Allow the primer to dry completely according to the manufacturer's instructions.
Application: Stir the Valtti Opaque paint well before use. Apply one to two coats using a brush, roller, or spray. For optimal performance and a uniform finish, ensure even application. Avoid painting in direct sunlight, high humidity, or when rain is expected. Ideal application temperatures are between +5°C and +30°C.
Compatibility: Valtti Opaque is suitable for most exterior wood surfaces including timber cladding, facades, doors, window frames, fences, and garden furniture. It is designed to be used with Tikkurila Ultra Primer for maximum performance. Do not use on surfaces previously treated with wax or oil-based finishes without thorough preparation.
Care: Clean application tools immediately after use with water. For maintenance, clean the painted surface with a soft brush or cloth and a mild detergent solution if necessary. Rinse thoroughly. Avoid abrasive cleaners or high-pressure washing, which can damage the coating.
