Hammer and Tongs Square Back Hat & Coat Hook - Black

The hook is forged from iron with a classic powder-coated finish.

No, this product is not suitable for bathrooms or unheated/damp rooms due to the cast iron material being prone to rusting.

Regular maintenance with a household wax polish is required to help prevent rusting. Ensure the hook is installed in a dry environment.

The dual prongs provide efficient and organized storage for multiple items like coats, hats, and bags, helping to save space.

You will need a drill to create a pilot hole. However, screws must be tightened by hand using a screwdriver; do not use a power screwdriver or drill for tightening.

As this product is handmade, all measurements provided are approximate.

The product comes with the hook and screw fixings for installation.

Ensure a pilot hole is drilled correctly. Use hand tools for tightening and avoid excessive force. If screws continue to break, try a slightly smaller drill bit for the pilot hole or use alternative fixings suitable for your wall type.

This is expected if not maintained. Clean off any existing rust with a fine steel wool (used gently), then apply a generous coat of household wax polish. Repeat applications regularly, especially in drier months, to build up a protective layer.

The wall fixings may not be secure. Remove the hook, check the pilot hole and wall plugs (if used), and re-install ensuring the screws are firmly tightened by hand. Consider using sturdier wall anchors if fixing into a weaker material.