Brother TN-910M Magenta Toner Cartridge - Yellow

The Brother TN-910M Magenta Toner Cartridge is rated for an approximate yield of 9,000 pages, based on ISO/IEC 19798 standards.

This cartridge is specifically compatible with the Brother HL-L9310CDWT and HL-L9310CDW printer models.

Using genuine Brother supplies like the TN-910M ensures optimal printer performance, consistent print quality, and helps maintain your printer's warranty. Non-genuine supplies may cause poor print quality or even damage your printer.

Follow the setup instructions provided in the guide: power off the printer, open the toner compartment, remove the old cartridge, insert the new TN-910M cartridge until it clicks, close the compartment, and power on the printer.

High yield cartridges generally contain more toner and are designed to print more pages than standard yield cartridges, often offering a lower cost per page for high-volume printing. The TN-910 range offers a single high capacity for each color.

According to the product information, this cartridge is manufactured in China.

The package dimensions are approximately 223 mm (width) x 180 mm (depth) x 343 mm (height), and the package weight is about 1.08 kg.

Ensure the toner cartridge is correctly installed. Check the printer's documentation for cleaning the drum unit or print head. Run a cleaning cycle if available on your printer model.

Verify that the cartridge is the correct model (TN-910M) and is fully seated in the printer. Try removing and reinserting it. If the issue persists, contact Brother support.

Handle the cartridge gently and ensure all protective seals are removed correctly before installation. If leakage occurs, clean the affected area of the printer immediately according to the printer's manual and replace the cartridge.

Confirm that the printer's settings are not excessively increasing toner usage. Ensure you are using the correct toner for your printer model. Genuine Brother toner is designed to achieve its stated page yield.