Brother TN-910C Cyan High Capacity Toner Cartridge - Cyan

The Brother TN-910C Cyan toner cartridge has an approximate page yield of 9,000 pages, based on ISO/IEC 19798 standards.

This cartridge is compatible with Brother HL-L9310CDWT and HL-L9310CDW printer models.

While non-genuine cartridges may fit, using original Brother supplies like the TN-910C is recommended to ensure optimal print quality, reliable performance, and to protect your printer from potential damage and maintain warranty validity.

Install the cartridge by opening the toner access cover, removing the old cartridge, unpacking and preparing the new one (removing seals), inserting it firmly until it clicks, closing the cover, and powering on the printer.

Store the toner cartridge in its original sealed packaging in a cool, dry place away from direct sunlight and extreme temperatures to maintain its quality.

Brother offers a recycling program for used genuine Brother toner cartridges. You can arrange for their return at no additional cost.

The high yield of 9,000 pages means fewer replacements are needed over time, leading to a lower cost per page, especially for high-volume printing tasks.

Ensure the toner cartridge is correctly installed. Run a cleaning cycle through the printer's maintenance menu. If the problem persists, the cartridge may be empty or defective; try a new cartridge.

Verify that the cartridge is the correct model for your printer and that it is fully seated in its compartment. Remove and reinsert the cartridge. Ensure all protective packaging was removed.

Ensure you are using genuine Brother toner. Non-genuine cartridges may not accurately report page counts or yield. Check printer settings to ensure they are not set to 'draft' mode, which can prematurely deplete toner.

Confirm the cyan cartridge (TN-910C) is installed in the correct cyan slot. Check printer settings for color adjustments. If the issue persists after confirming correct installation and settings, the cartridge may be faulty.