Best current price£141.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£141.75Visit shop B&Q - Acrylic Roofing Waterproofing Roof Repair Fibre Reinforced20Kg Black Kit
Visit shop2 offers from £141.75
View price history by clicking the chart icon.
The TekCryl Acrylic Roofing Waterproofing Roof Repair Fibre Reinforced - 20Kg Black Kit is designed for homeowners and DIY enthusiasts seeking a durable, flexible, and easy-to-apply solution for roof repairs and waterproofing. Its key benefit is immediate shower-proofing upon application, offering quick protection against leaks. However, it is not suitable for balconies or walkways, limiting its use on certain exterior surfaces. This product is a cold-applied, fiber-reinforced formula that can be applied with a brush or roller to various substrates, providing excellent crack and gap filling capabilities.
| Colour | Black |
|---|---|
| Model Part Number | TEK020BKIT |
| Brand | TekCryl |
Yes, TekCryl can be applied in damp conditions and becomes showerproof on application, offering immediate protection.
It can be applied to felt, bitumen, steel, wood, concrete, and asbestos. It is not suitable for balconies or walkways.
TekCryl is applied cold using a brush or roller. It is ready to use straight from the can.
The fibre reinforcement makes the product excellent for filling cracks and bridging gaps, adding strength and durability to the repair.
No, TekCryl is not suitable for balconies or walkways where foot traffic occurs.
Store in the original sealed container in a cool, dry place away from direct sunlight and extreme temperatures.
The product is designed to be unaffected by temperature once applied and cured. However, application is best carried out between 5°C and 30°C.
Ensure the product has been stored correctly and has not frozen. Stir thoroughly. If very cold, allow the container to warm up to a suitable application temperature (typically above 5°C).
The surface may not have been adequately prepared. Ensure it was clean, dry (or appropriately damp for application), and free from dust, dirt, or loose material. For very smooth surfaces, pre-treatment or light abrasion might be necessary.
This can occur if applied too thickly in one coat, especially on porous surfaces, trapping moisture or air. Apply in thinner, even coats. Ensure adequate ventilation during drying if possible.
This may indicate application in excessively cold or humid conditions, or if applied too thickly. Allow more time to cure. Ensure proper ventilation. Avoid foot traffic on the treated area until fully cured.
Setup:
TekCryl is ready to use directly from the container. Ensure the surface to be treated is clean, dry (or damp, as it can be applied in damp conditions), and free from loose debris, moss, or algae. For best adhesion on very smooth or glossy surfaces, a light abrasion may be beneficial. Stir the product thoroughly before application to ensure the fibres are evenly distributed.
Compatibility:
TekCryl is compatible with a wide range of building materials including:
*Important Note*: TekCryl is *not* suitable for use on balconies or walkways where foot traffic occurs.
Care and Maintenance:
Once applied and cured, TekCryl requires minimal maintenance. Regularly inspect the roof for any new damage or wear. Clean the treated area gently with water if needed. Avoid harsh abrasive cleaners.
Application Method:
Storage:
Store in the original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lid is tightly sealed to maintain product quality.
