Best current price£141.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£141.75Visit shop B&Q - Acrylic Roofing Waterproofing Roof Repair Fibre Reinforced20Kg Grey Kit
Visit shop2 offers from £141.75
View price history by clicking the chart icon.
The TekCryl Acrylic Roofing Waterproofing Roof Repair is for homeowners and contractors seeking a durable, flexible, and easy-to-apply solution for pitched and flat roof repairs. Its key benefit is immediate shower-proofing and excellent crack-filling capabilities, suitable for various substrates even in damp conditions. A key caveat is that it is not suitable for balconies or walkways due to temperature sensitivity.
| Colour | Grey |
|---|---|
| Model Part Number | TEK020GKIT |
| Brand | TekCryl |
Yes, TekCryl can be applied over most existing bituminous or felt roofing materials, provided they are sound and well-adhered. Remove any loose or flaking material first.
TekCryl is immediately shower-proof upon application. Full curing time will depend on temperature and humidity, but it is designed for rapid weather resistance.
TekCryl is designed to be unaffected by temperature once cured. However, for application, it is best used in moderate temperatures. Avoid applying in freezing conditions or extreme heat.
No, TekCryl is not suitable for balconies or walkways where foot traffic or constant abrasion occurs.
Clean brushes and rollers immediately after use with a suitable solvent, such as white spirit or mineral turpentine.
It adheres to felt, bitumen, steel, wood, concrete, and asbestos on both pitched and flat roofs.
TekCryl is fibre-reinforced, making it excellent for filling and bridging cracks and gaps. For very large or deep holes, multiple layers may be required, or a suitable backing material might be needed.
Stir the product thoroughly. If extreme cold has affected viscosity, allow it to warm up to a workable temperature before application.
Ensure the substrate is clean, dry (or appropriately damp for application), and free from dust, grease, or loose material. Reapply after surface preparation.
This can sometimes occur in very humid or cold conditions. Ensure adequate ventilation. The product should cure over time; if it persists excessively, contact manufacturer support.
Check application conditions. Very low temperatures or excessive moisture can slow curing. Ensure the product was applied within its recommended temperature range.
Setup:
TekCryl is ready to use directly from the container. Ensure the surface to be repaired is clean and free from loose debris, moss, or standing water where possible. For best adhesion, the surface should be sound. Stir the product thoroughly before application to ensure even consistency.
Compatibility:
This product is designed for application on a variety of roofing substrates including:
It is suitable for both pitched and flat roofs. It is *not* suitable for balconies or walkways due to its temperature sensitivity.
Care:
Clean application tools (brushes, rollers) with a suitable solvent immediately after use. Store the container in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed when not in use to maintain product quality.
