Fischer HM-S Metal Cavity Fixing - Grey

The Fischer HM-S is designed for use with all panel building materials with a thickness of 7 - 21 mm.

You need a drill hole diameter of 1 cm.

Yes, the HM-S fixing allows for repeated removal and installation without reducing load-carrying properties.

You will need a drill, and ideally fischer installation pliers HM-Z 1. Alternatively, you can use a screwdriver or cordless screwdriver.

The load capacity depends on the specific application and the board building material. Please refer to the product specifications for load-bearing information.

It is suitable for hanging items like lights, towel rails, and curtain rails.

Ensure the fixing is correctly placed and that you're using the appropriate tool (pliers or screwdriver) to expand it. Check for obstructions in the wall cavity.

Ensure the drill hole is the correct diameter (1 cm). If the hole is too large, use a larger fixing or fill the hole before re-drilling.

Verify that the expanding arms have fully engaged behind the board material. Check that the screw is tightened correctly.

Make sure you are using the correct tools, like the fischer installation pliers HM-Z 1, or a screwdriver/cordless screwdriver for installation. Ensure the hole is clean and free of debris.