Best current price£52.15from The Range
Shopping.co.uk recommended and popular offers
The Range£52.15Visit shop Jcp Construction Products Shield Anchors Loose Bolt Zyp - M8 X 60/10Mm (Box Of 130) - White
Visit shop41 offers from £52.15 - £89.34
View price history by clicking the chart icon.
The JCP CONSTRUCTION PRODUCTS Shield Anchors Loose Bolt (Zyp M12 X 135/60mm) is designed for professionals and serious DIYers tackling heavy-duty fastening projects. Its primary benefit is providing reliable, secure fixing for substantial loads, ensuring structural integrity. A minor consideration is that it's sold in a box of 50, which might be more than needed for small, single-use projects. This product offers high-quality material, easy installation, versatile use for indoor/outdoor applications, and a secure fixing mechanism for safety and stability.
| Model Part Number | Zyp M12 X 135/60mm |
|---|---|
| Brand | JCP CONSTRUCTION PRODUCTS |
These anchors are best suited for solid base materials such as concrete, dense brick, and solid stone. Ensure the material is strong enough to support the intended load.
You will need to use a drill bit that matches the specified diameter for the M12 shield anchor. Consult the product's technical data sheet or packaging for the exact recommended drill bit size, as this can vary slightly by manufacturer.
Yes, the JCP CONSTRUCTION PRODUCTS Shield Anchors are designed for versatile use, including outdoor applications. However, for extremely corrosive environments, consider stainless steel options.
Each box contains 50 shield anchors.
These are heavy-duty anchors designed for secure fixing of substantial loads. Specific load capacities (e.g., shear and pull-out strength) depend on the base material and correct installation. Always refer to manufacturer specifications for precise load ratings.
Once installed and tightened, shield anchors are generally considered permanent fixings. Removal would typically involve cutting or grinding flush, and the anchor would need to be replaced.
You will need a drill to create the hole and an appropriate wrench or socket set to tighten the bolt. Ensure you have the correct size drill bit for the anchor.
The hole may be too large, or the base material might be compromised. Ensure the correct drill bit size was used and that the material is solid and intact. Remove the anchor and re-attempt in a fresh, correctly sized hole if possible.
Check that the shield anchor has fully expanded within the base material. Ensure the bolt is properly engaged with the shield and that the base material is suitable (solid concrete, brick, etc.). Verify the bolt is the correct size for the anchor.
For standard applications, minor surface corrosion is often cosmetic. If significant corrosion is present, especially in critical structural applications, the anchor may need to be replaced. Consider using stainless steel anchors for highly corrosive environments.
Setup:
Compatibility:
These anchors are designed for use in solid base materials such as concrete, brick, and stone. They are not recommended for use in hollow materials or plasterboard without appropriate backer boards.
Care:
While made from durable materials, regular visual inspection for signs of corrosion or damage is recommended, especially in harsh environments. Clean away any accumulated dirt or debris. Ensure fixings remain tight, particularly in areas subject to vibration.
