Best current price£109.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£109.99Visit shop (5 Litre, Gun Metal Grey) Plasti Dip Flexible Rubber Paint - 100'S Of Uses 5060418741235
Visit shop2 offers from £109.99
View price history by clicking the chart icon.
The Plasti Dip Flexible Rubber Paint in Gun Metal Grey is ideal for DIY enthusiasts, hobbyists, and professionals looking to add a durable, protective, and aesthetically pleasing finish to a wide range of surfaces. Its key benefit is its versatile, rubberized coating that provides protection against moisture, chemicals, and abrasion while offering a non-slip surface. A potential caveat is ensuring proper application for an even finish, especially on intricate items.
| Colour | Grey |
|---|---|
| Brand | Plasti Dip |
For optimal durability and ease of removal, a minimum of 4-6 thin, even coats is recommended. For high-wear areas, additional coats may be beneficial.
Plasti Dip is designed to be peelable. For best results, start peeling from an edge. If it's difficult to peel, you can use a dedicated Plasti Dip remover or mineral spirits to help soften the coating.
Yes, Plasti Dip can be painted over with most standard paints, but it's always recommended to test on a small, inconspicuous area first to ensure compatibility.
Plasti Dip is highly versatile and can be applied to metal, wood, plastic, glass, masonry, fabric, rope, and more. Always ensure the surface is clean and dry.
The lifespan of Plasti Dip depends on the application, environmental conditions, and wear. Typically, it can last for several years if properly applied and cared for, offering good protection against abrasion and weathering.
Yes, Plasti Dip provides a moisture-resistant barrier once fully cured, protecting surfaces from water and humidity.
Spray cans are convenient for smaller projects and touch-ups, offering ease of use. Gallons are more economical for larger projects and are typically applied with a sprayer (like an HVLP sprayer), allowing for a more uniform and professional finish over large areas.
Ensure the surface is clean and free from contaminants. Apply in thinner coats, maintaining consistent distance and speed. Ensure adequate ventilation and avoid applying in humid or windy conditions.
The surface may not have been properly prepared. Ensure it was clean and dry before application. Apply more coats for better adhesion and integrity. Check if the product is being exposed to chemicals it's not resistant to.
Ensure enough coats were applied (minimum 4-6 recommended). Use a dedicated Plasti Dip remover or mineral spirits for stubborn areas. Gently peel or use a plastic scraper.
Shake the can thoroughly before and during use. If clogs occur, clear the nozzle with a fine wire or by soaking the nozzle in a suitable solvent, then reattach and test on scrap material.
Setup and Application:
Compatibility:
Plasti Dip can be applied to metal, wood, plastic, glass, masonry, fabric, concrete, and more. It is crucial to test on an inconspicuous area first, especially on plastics, to ensure compatibility.
Care:
