Everbuild Evercryl Roof Repair - Grey - 2.5kg

Everbuild Evercryl One Coat can be applied to concrete, fibre/cement, roofing felt, mastic asphalt, existing bituminous coatings, rigid PVCu, corrugated iron, metals, slates, brickwork, tiles, lead, copper, and zinc.

Everbuild Evercryl One Coat provides instant waterproofing, even in wet conditions, however applying in heavy rain is not recommended, for optimal adhesion.

One kg of Everbuild Evercryl One Coat covers approximately 0.75 square meters.

No, Everbuild Evercryl One Coat requires no primer on most sound, non-porous surfaces.

Please check the product container for specific shelf-life information. Store in a cool, dry place.

Clean tools with a suitable solvent immediately after use. Refer to the product label for recommended solvents.

Yes, Everbuild Evercryl One Coat is suitable for waterproofing gutters, downpipes, gullies, flashings, upstands, vents, and leadwork.

Ensure the surface is thoroughly cleaned and free from any loose materials or existing coatings. Lightly abrade glossy surfaces to improve adhesion.

Ensure the coat is not too thick. Apply in a single, even coat. Consider applying a second coat if required, allowing the first coat to fully dry.

Ensure the temperature is not too low (below -5°C). Ensure adequate ventilation to allow solvent evaporation.

Ensure the entire affected area is covered, check for additional cracks. Apply a second coat if necessary, allowing sufficient drying time between coats.