INNOV8 COATINGS UPVC Window Spray Paint - Grey

Yes, this paint is formulated as an all-in-one system that does not require a separate primer or top coat for optimal performance and finish on compatible surfaces.

The paint offers a durable, weatherproof finish and comes with a 10-year guarantee against cracking, blistering, and color fade.

Yes, you can paint over existing uPVC colors. Ensure the surface is properly prepared and clean. It's recommended to test on a small, inconspicuous area first.

Each 400 ml aerosol can provides coverage for a minimum of 4 square meters.

Yes, the paint is weatherproof and designed for both exterior and interior use on a variety of materials.

Painted surfaces can be cleaned using a damp cloth and mild detergent. Avoid abrasive cleaners to maintain the finish.

It is best to mask off surrounding areas with masking tape and paper before painting. If accidental overspray occurs, wipe away immediately with a suitable solvent before the paint dries.

Shake the can more vigorously for a longer period (at least 2 minutes). Ensure the nozzle is not clogged. If clogged, remove the nozzle and clean it with a solvent according to can instructions, or replace the can.

The surface was likely not adequately cleaned or prepared. Ensure the surface is thoroughly degreased, dry, and lightly abraded if necessary. Reapply following preparation guidelines.

This often occurs from spraying too close to the surface or applying paint too thickly. Apply in thin, even coats, holding the can approximately 25-30 cm away. Allow sufficient drying time between coats.

Check that you are applying the paint evenly and at the recommended thickness. Ensure you have purchased enough cans for your project; remember each can covers a minimum of 4 sq meters.