INNOV8 COATINGS UPVC Window Spray Paint - White - 400 Ml - Satin Finish - Fast Drying

For best results and durability, apply 2-3 thin, even coats, allowing adequate drying time between each coat as recommended on the can.

One 400 ml can provides a minimum coverage of approximately 2 square meters, depending on the surface porosity and application thickness.

Yes, the paint is compatible with primed surfaces. Ensure the primer is suitable for the material (e.g., plastic primer for UPVC) and fully dry before application.

The paint is fast-drying. Touch dry times are typically within 15-20 minutes, with recoating possible after approximately 30-60 minutes. Full curing may take longer.

Yes, a satin finish provides a smooth, low-lustre sheen that is less reflective than gloss but still has a noticeable shine.

While versatile, avoid using on fabrics, flexible plastics, or surfaces that require extreme flexibility or chemical resistance beyond standard household conditions. Always test first.

Store cans upright in a cool, dry place away from direct sunlight and sources of ignition. Ensure the nozzle is clear after use.

Unopened cans typically have a shelf life of several years when stored correctly. Once opened, use within a reasonable timeframe.

Shake the can more vigorously for an extended period. Ensure the nozzle is not blocked; if it is, remove it and clean carefully with a pin or solvent, then reattach. Ensure the can is at room temperature.

Apply paint in lighter, even coats. Hold the can at the recommended distance (typically 20-30 cm) from the surface. Avoid applying too much paint at once. If runs occur, allow to dry and gently sand down before re-applying a lighter coat.

Surface was not adequately cleaned or prepared. Ensure all grease, dirt, and moisture were removed and the surface was lightly abraded. Re-prepare the surface and reapply.

This is often due to insufficient surface preparation or exposure to extreme conditions without proper application. Ensure adequate preparation and apply in suitable weather conditions (avoiding direct sun or high humidity).