Guard Gip Zinc Phosphate Primer - Orange - 5Ltr
Best current price£54.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£54.95Visit shop B&Q - Gip Zinc Phosphate Primer Orange 5Ltr
Visit shopB&Q£54.95Visit shop One Offer
1 offer from £54.95
View price history by clicking the chart icon.
Product Information
Full details
This Guard Gip Zinc Phosphate Primer in Orange is designed for DIY enthusiasts and professionals needing a durable, anti-corrosive coating for metal surfaces. Its key benefit is providing excellent protection against atmospheric conditions with a fast-drying, high-build formula that can be applied directly to metal. A potential caveat is its primary suitability for prepared mild steel and ferrous substrates, requiring proper surface preparation for optimal adhesion on other metals.
All features
| Colour | Orange |
|---|---|
| Model Part Number | GGIP/C/5 |
| Brand | Guard |
Extended Product Information
FAQs
What surfaces can I use this primer on?
This primer is principally intended for prepared mild steel substrates, ferrous metals, and suitable prepared non-ferrous metals. Always ensure the surface is properly prepared and test on a small area if unsure.
Do I need to use a separate primer before this one?
No, this is a direct-to-metal (DTM) system, meaning it can be applied directly to prepared metal surfaces without the need for a separate primer.
How long does it take to dry?
Under normal conditions (20°C), it typically takes 2-4 hours for the primer to dry between coats. However, this can vary based on temperature, humidity, and ventilation.
Can I spray this primer?
Yes, this primer can be applied with a brush, roller, or spray gun. If spraying, you may need to dilute it with up to 5% white spirit.
What is the best way to clean my tools after use?
Clean application tools immediately after use with white spirit.
How should I store the primer?
Store the primer in a cool, dry place away from direct sunlight and frost, with the container tightly closed.
Does the color affect the primer's performance?
The primer's core anti-corrosive and high-build properties are consistent across all available colors. The color is primarily for aesthetic choice or system identification.
Troubleshooting
Primer is too thick to apply
Stir thoroughly. If still too thick, dilute with a small amount of white spirit (up to 5%) for spray application.
Poor adhesion to the surface
Ensure the surface was properly cleaned, dried, and de-greased before application. Lightly abrading the surface can also improve adhesion.
Uneven finish
Ensure the primer is stirred well before and during use. Apply thin, even coats rather than attempting to cover in one thick layer. Check for and remove any debris or 'lumps' in the primer.
Extended drying times
Drying times are dependent on temperature and humidity. Ensure good ventilation. Avoid applying in very cold, damp, or humid conditions.
Pros and Cons
Pros
- Excellent anti-corrosive properties.
- Fast drying time speeds up projects.
- High-build formula offers good coverage.
- Can be applied directly to metal surfaces.
- Suitable for various application methods (brush, roller, spray).
Cons
- Primarily intended for prepared mild steel and ferrous substrates.
- Requires proper surface preparation for optimal performance.
- Alkyd-based formula may have longer drying times in humid conditions.
- Specific compatibility with non-ferrous metals needs verification.
Setup, Compatibility & Care
Preparation: Ensure the surface to be painted is clean, dry, and free from grease, oil, rust, and flaking paint. For best adhesion, lightly abrade the surface with sandpaper and wipe clean. If painting over existing paint, ensure it is sound and adheres well.
Application: Stir the primer thoroughly before use. Apply one or two coats using a brush, roller, or spray gun. For spray application, dilute with up to 5% white spirit if necessary. Allow adequate drying time between coats, typically 2-4 hours at 20°C, depending on humidity and ventilation.
Compatibility: Primarily designed for prepared mild steel, ferrous metals, and suitably prepared non-ferrous metals. Always test on a small, inconspicuous area if unsure about compatibility with specific substrates or existing coatings.
Care: Store the primer in a cool, dry place away from direct sunlight and frost. Keep the container tightly closed when not in use. Clean application tools immediately after use with white spirit.