Guard Gip Zinc Phosphate Primer - Blue - 5Ltr
Best current price£54.95from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£54.95Visit shop B&Q - Gip Zinc Phosphate Primer Blue 5Ltr
Visit shopB&Q£54.95Visit shop One Offer
1 offer from £54.95
View price history by clicking the chart icon.
Product Information
Full details
This Guard Gip Zinc Phosphate Primer in Blue is designed for professionals and DIY enthusiasts seeking robust corrosion protection for prepared mild steel and other suitable metal substrates. Its key benefit is excellent anticorrosive properties combined with fast drying times, allowing for efficient handling. A potential caveat is that it is principally intended for prepared substrates, meaning proper surface preparation is crucial for optimal performance.
All features
| Colour | Blue |
|---|---|
| Model Part Number | GGIP/C/5 |
| Brand | Guard |
Extended Product Information
FAQs
Can this primer be used on galvanized steel?
While the primer is suitable for prepared non-ferrous metals, it is recommended to test compatibility on a small area of galvanized steel first, as adhesion can vary depending on the surface condition and preparation.
What is the best way to apply this primer?
The primer can be applied by brush, roller, or spray. Choose the method that best suits the size and nature of the surface you are coating for optimal results.
How long does it take for the primer to dry?
Drying times can vary based on temperature, humidity, and film thickness. It is fast drying and allows for fast handling, but refer to the product's technical data sheet for specific drying times.
Can I apply a topcoat over this primer?
Yes, this primer is designed to be overcoated with appropriate topcoats, typically other alkyd-based paints. Ensure the primer is dry and clean before applying the topcoat.
What are the storage recommendations for this primer?
Store the primer in a cool, dry place, away from direct sunlight and heat. Keep the container tightly sealed when not in use.
Is this primer suitable for marine environments?
The primer offers good anticorrosive properties under atmospheric conditions, making it suitable for many applications. For harsh marine environments, ensure it is used as part of a complete coating system that meets specific requirements.
What kind of surfaces is this primer intended for?
It is principally intended for prepared mild steel substrates, ferrous, and suitable prepared non-ferrous metal substrates.
Troubleshooting
Primer not drying or handling properly
Ensure application in appropriate temperature and humidity conditions. Avoid applying too thickly. Check that the correct thinner (if used) was added in the correct proportion.
Poor adhesion to substrate
Verify that the substrate was adequately prepared (cleaned, free from rust, grease, and old paint). Ensure the primer was stirred thoroughly and applied within its recommended shelf life.
Surface appears rough or has defects after drying
This could be due to dust contamination during drying, or the primer being applied too thickly. Lightly sand the affected area once fully dry and reapply a thinner coat.
Primer shows signs of rust bleed-through
The surface may not have been adequately de-rusted or prepared. Ensure all rust is removed and apply a thicker coat of primer or an additional coat if necessary.
Pros and Cons
Pros
- Offers excellent anticorrosive properties.
- Fast drying and handling times improve workflow efficiency.
- Suitable for direct application to metal, simplifying the process.
- High-build formula provides substantial protection.
- Can be applied with brush, roller, or spray for user convenience.
Cons
- Requires properly prepared metal substrates for optimal performance.
- Primarily intended for ferrous metals; compatibility with all non-ferrous metals needs verification.
- Alkyd-based, may have longer full cure times compared to some other resin types.
Setup, Compatibility & Care
Setup:
Ensure the surface to be coated is clean, dry, and free from grease, oil, rust, and other contaminants. For best results, mechanically abrade or thoroughly clean the substrate. Stir the primer thoroughly before use. If thinning is required for spray application, use a suitable alkyd thinner as recommended by the manufacturer.
Compatibility:
This primer is principally intended for prepared mild steel substrates, ferrous, and suitable prepared non-ferrous metal substrates. It is compatible with most standard alkyd topcoats. Always test compatibility on a small, inconspicuous area if unsure.
Care:
Store containers in a cool, dry place away from direct sunlight and sources of ignition. Keep containers tightly closed when not in use. Clean application equipment immediately after use with a suitable solvent or thinner.