PlastiKote Fast Dry Enamel Aerosol - Jade - 100ml

This PlastiKote Fast Dry Enamel Aerosol in Jade is suitable for a variety of materials including cardboard, ceramic, glass, metal, paper, plastic, wicker, and wood.

The paint is typically touch-dry within 20 to 30 minutes.

No, the cap is not a true representation of the final finish. It is recommended to test the color on a scrap surface if an exact match is critical.

Yes, it can be used outdoors, but ensure application is done in a well-ventilated area, away from direct sunlight, moisture, and extreme temperatures for best results and durability.

After painting, turn the can upside down and spray for a few seconds to clear the nozzle. If the nozzle becomes clogged, it can be removed and soaked in a suitable solvent, then dried before reattaching.

The aerosol can contains 100ml of paint.

While it can be used on metal, this specific product is designed for model, hobby, and craft use. For automotive applications, specialized automotive paints are generally recommended for optimal performance and durability.

Ensure the can was shaken sufficiently. Check for blockages in the nozzle; if necessary, clean the nozzle with a solvent (refer to can instructions) or replace it. Ensure the can is held at the correct distance from the surface.

Ensure application conditions are within the recommended temperature range (10°C-30°C) and humidity levels are not too high. Avoid applying thick coats, which can prolong drying times.

Verify that the surface was properly prepared (clean, dry, free of grease/rust) and that any glossy surfaces were lightly sanded. Ensure the correct primer was used if necessary for the specific surface type.

Apply paint in thin, even coats, allowing for slight drying between passes. Ensure consistent motion and distance from the surface during application. Shake the can frequently during use.