Best current price£89.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£89.99Visit shop B&Q - SuperdecA6452DAmusement5L
Visit shopB&Q£114.47Visit shop B&Q - Country Shades Bs 08B21 Antelope 2.5L
Visit shop6 offers from £89.99 - £114.47
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals looking for a durable, natural oil-based wood finish. The CrownTrade Osmo Country Shades in Brown offers excellent weather protection and a natural wood aesthetic, though it completely covers the wood grain. It's a microporous, breathable finish that is water-repellent, extremely weatherproof, and UV stable, preventing cracking, peeling, flaking, or blistering. Application is easy and seamless, with the finish remaining workable during coating and drying to a safe surface for humans, animals, and plants.
| Colour | Brown |
|---|---|
| Model Part Number | 08B21 |
| Brand | Crown Trade |
It is best used on bare or previously oiled wood. If painting over old paint, ensure it is thoroughly cleaned, sanded, and primed. Test compatibility first.
Generally, two thin coats are recommended for optimal protection and finish. A third coat can be applied for a more pronounced satin-gloss effect.
Drying time is typically around 24 hours for recoating, but this can vary depending on temperature, humidity, and ventilation. Ensure the surface is dry to the touch and no longer tacky.
While it offers excellent weather protection, specific decking oils might be more suited for high-traffic horizontal surfaces. This product is excellent for vertical cladding, fences, and furniture.
Clean with a damp cloth. Avoid harsh chemical cleaners or abrasive pads, which can damage the finish.
Coverage varies depending on the wood type and surface porosity, but typically one litre covers approximately 12-18 square meters with one coat.
Sanding between coats is generally not required, provided the previous coat is dry and has not been allowed to become dusty. If a perfectly smooth finish is desired, a very light de-nibbing with fine-grit sandpaper can be done before the final coat.
Ensure the product is applied thinly and evenly. Maintain a 'wet edge' during application to blend coats smoothly. Avoid overworking the product.
Check for inadequate ventilation, low temperatures, or excessive application thickness. Ensure the surface was properly prepared and is completely dry before application.
While the product preserves texture, if a smoother finish is desired, consider a different product. For this product, ensure even application to minimize texture variations.
This usually indicates a coat that is too thick or insufficient drying time/ventilation. Apply a very thin coat of the product to the affected area and allow to dry with good airflow. If necessary, gently buff with a fine abrasive pad.
Preparation: Ensure the wood surface is clean, dry, and free from dust, dirt, grease, and old finishes. Lightly sand any rough areas. For unfinished wood, apply one coat of Osmo Wood Wax All-Rounder for enhanced protection.
Application: Stir the Osmo Country Shades thoroughly before and during use. Apply a thin, even coat using a brush or roller in the direction of the wood grain. Allow the first coat to dry thoroughly (typically 24 hours, depending on ventilation and temperature). Apply a second thin coat. For a more pronounced satin-gloss finish, apply a third coat.
Compatibility: This product is designed for wood surfaces. It is compatible with most common wood types. Always test on an inconspicuous area first.
Care: Clean tools and spills immediately with a suitable solvent (e.g., white spirit). For maintenance, clean the finished surface with a damp cloth. Minor scuffs or scratches can often be repaired by applying a thin coat of the Osmo Country Shades to the affected area. Avoid abrasive cleaners.
