CrownTrade Emulsion Paint - Red
Manufacturer: Crown Trade
Best current price£89.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£89.99Visit shop B&Q - Superdec Paint Maroon 5L
Visit shopB&Q£89.99Visit shop All Offers
6 offers from £89.99 - £114.47
View price history by clicking the chart icon.
B&Q - Superdec Bleached Oak 5LFree delivery in 1–3 days£89.99Visit shop →
B&Q - SuperdecH4491YWiswell5LFree delivery in 1–3 days£89.99Visit shop →
B&Q - SuperdecG6261TForest Of Bowland5LFree delivery in 1–3 days£89.99Visit shop →
B&Q - Country Shades Bs 04E53 Poppy 2.5LFree delivery in 1–3 days£114.47Visit shop →
B&Q - Country Shades Bs 04B15 Rosepetal 2.5LFree delivery in 1–3 days£114.47Visit shop →
Product Information
Full details
This CrownTrade Emulsion Paint in Red is designed for DIY enthusiasts and professional decorators looking for a durable and vibrant finish for interior walls and ceilings. Its key benefit is providing excellent coverage and a smooth, washable surface. A potential caveat is that optimal results require proper surface preparation.
All features
| Colour | Red |
|---|---|
| Brand | Crown Trade |
Extended Product Information
FAQs
What kind of surface is this paint suitable for?
This emulsion paint is suitable for interior walls and ceilings, including plaster, wallpaper, and previously painted surfaces.
How many coats of paint are typically needed?
Generally, two coats are recommended for optimal coverage and a uniform finish. However, this can vary depending on the surface condition and the colour being covered.
Can this paint be used in a bathroom or kitchen?
While the paint is washable, it is not specifically formulated for high-moisture areas like bathrooms or kitchens. For these areas, a specialized moisture-resistant paint is usually recommended.
How long does the paint take to dry?
The paint typically takes 2-4 hours to dry to the touch. Ensure adequate ventilation. A second coat should not be applied until the previous coat is fully dry.
Is this paint suitable for exterior use?
No, this CrownTrade Emulsion Paint is specifically designed for interior applications only.
How do I clean application tools after use?
Clean brushes, rollers, and other equipment immediately after use with warm water and soap.
What is the best way to achieve a smooth finish?
Ensure proper surface preparation, stir the paint well, and apply in thin, even coats using a quality brush or roller. Avoid applying too thickly.
Troubleshooting
Paint is too thick or lumpy
Stir thoroughly. If still too thick, add a very small amount of water (no more than 10%) and mix well. Ensure paint has not been stored in freezing conditions.
Uneven or patchy finish
Ensure the surface was properly prepared and primed. Apply paint evenly with consistent pressure using a brush or roller. Apply a second coat if necessary, ensuring the first coat is completely dry.
Colour does not match expectations
Colours can appear different under various lighting conditions. Always test a small area first. Ensure the underlying surface colour is not significantly different, which might affect the final hue. Consider a primer.
Brush marks are visible
Apply paint with a good quality brush or roller. Use smooth, even strokes. Avoid overworking the paint. For large areas, consider using a roller.
Pros and Cons
Pros
- Provides a rich and appealing red finish.
- Washable surface for easy maintenance.
- Good coverage for efficient application.
- Durable and long-lasting coating.
- Reputable brand quality.
Cons
- Requires proper surface preparation for best results.
- May require a primer for drastic colour changes.
- Specific drying times need to be adhered to.
- Best suited for interior use only.
- Red shades can sometimes show brush marks if not applied carefully.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes with a suitable filler and sand smooth once dry. Apply a suitable primer, especially if painting over a dark or uneven colour, or if preparing new plaster.
Application: Stir the paint thoroughly before use. Apply with a brush or roller, working in a criss-cross motion for even coverage. Allow at least 2-4 hours for the first coat to dry before applying a second coat.
Compatibility: Suitable for interior walls and ceilings. Not recommended for use on floors, exterior surfaces, or areas of condensation.
Care: Clean brushes and rollers immediately after use with water. For cleaning the painted surface, use a soft, damp cloth. Avoid abrasive cleaners, as they may damage the finish.