Best current price£89.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£89.99Visit shop B&Q - SuperdecA6452DAmusement5L
Visit shopB&Q£114.47Visit shop B&Q - Country Shades Bs 08B21 Antelope 2.5L
Visit shop6 offers from £89.99 - £114.47
View price history by clicking the chart icon.
CrownTrade Sadolin Superdec Satin Brown is a water-borne, highly durable opaque finish for exterior surfaces including wood, weathered plastic, steel, cladding, concrete, and masonry. Its key benefit is its flexibility and resistance to cracking, peeling, and flaking due to its unique weathering erosion. A potential caveat is the need for a blocking primer on very resinous timber to prevent discolouration, especially with lighter shades.
| Colour | Brown |
|---|---|
| Model Part Number | A6452D |
| Brand | CrownTrade |
Sadolin Superdec Satin is specifically designed for exterior use and is optimized for durability against weather conditions. While it can be applied indoors, its properties are best utilized outdoors.
Generally, two coats are recommended for optimal protection and coverage. However, this can vary depending on the surface condition and the desired finish. Allow adequate drying time between coats.
Drying times vary based on temperature, humidity, and airflow. Typically, it is touch dry in 1-2 hours and ready for a second coat in 4-6 hours. Always refer to the product can for specific times.
Yes, Sadolin Superdec Satin can be applied to previously painted or stained surfaces. Ensure the surface is clean, dry, and lightly abraded for best adhesion.
Clean brushes, rollers, and other application tools with water immediately after use.
It is suitable for wood, weathered plastic, steel, cladding, concrete, and masonry, including exterior doors and windows.
Sadolin Superdec Satin is formulated for durability against weathering. While all exterior finishes may experience some natural weathering over extended periods, the formulation is designed to resist significant fading and maintain its colour.
Ensure the surface was properly prepared, clean, dry, and free from contaminants. Check if a primer was needed and applied correctly on resinous wood.
Ensure the paint was thoroughly stirred before application. Apply subsequent coats evenly, avoiding over-application in some areas and under-application in others. Check if the surface was properly primed.
This is rare with Superdec, but if it occurs, it may indicate poor surface preparation or application over a contaminated surface. Remove the affected paint, prepare the surface correctly, and reapply.
On resinous timber, a blocking primer should have been used. If discolouration appears, it may require removing the affected paint and reapplying with a primer first.
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Remove any loose or flaking paint. For very resinous timber, apply a suitable blocking primer to minimize extractive discolouration, particularly for white and pale shades. For previously painted or stained surfaces, light abrasion may be necessary to ensure adhesion.
Application:
Stir the paint thoroughly before use. Apply one or two coats using a brush or roller. Allow sufficient drying time between coats as per manufacturer recommendations, which can vary based on temperature and humidity. Avoid application in very cold, hot, or wet conditions.
Compatibility:
Sadolin Superdec Satin is suitable for wood, weathered plastic, steel, cladding, concrete, and masonry. It can be applied to new and previously painted or stained surfaces.
Care:
Clean application tools with water immediately after use. For routine cleaning of the finished surface, use a damp cloth with mild detergent if necessary. Avoid abrasive cleaners.
