Barrettine Armourflex Worktop Oil - Satin - 500Ml

Yes, it is expertly designed for worktops and tables, offering superior nourishment and protection against spills, stains, and scratches. It is also certified Food & Toy safe.

Typically, 2-3 coats are recommended for optimal protection and finish. Ensure adequate drying time between each coat.

Yes, treated surfaces are easily spot repaired. Apply a small amount of oil to the affected area and blend it in for a seamless repair.

The oil has a 4-hour drying time between coats.

Yes, it is suitable for all types of solid wood and premium veneers.

Clean spills immediately with a damp cloth and mild detergent. Avoid abrasive cleaners to maintain the protective finish.

If excess oil is not wiped off, it can create a sticky, uneven finish that will not cure properly. Always ensure all unabsorbed oil is removed.

Too much oil was applied, or excess was not removed properly. Ensure all excess oil is wiped off thoroughly after the penetration time. If the surface has gone tacky, try wiping it down with a cloth dampened with white spirit (test in an inconspicuous area first) and allow to dry completely before reapplying a thinner coat.

This can occur if oil penetration was inconsistent or if excess was not wiped off evenly. Ensure the surface is properly sanded and clean before application. Apply thin, even coats and always wipe off excess thoroughly. For existing unevenness, lightly sand the area and reapply oil, ensuring consistent application and wipe-off.

The wood may not have received enough coats, or the protective layer has worn down. Clean the affected area and reapply a coat of Armourflex Worktop Oil, ensuring thorough drying and curing.

The wood surface may be sealed or non-porous. Ensure the surface is properly prepared and has not been previously coated with a non-penetrating finish. Sand lightly to open the wood grain if necessary.