Ronseal One Coat Fence Life Paint - Red Cedar


Best current price£9.36from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.36Visit shop RONSEAL ONE COAT SHED & FENCE PROTECTOR RED CEDAR 5L
Visit shop

Best current price£9.36from eBay
Shopping.co.uk recommended and popular offers
eBay£9.36Visit shop RONSEAL ONE COAT SHED & FENCE PROTECTOR RED CEDAR 5L
Visit shop7 offers from £9.36 - £18.75
View price history by clicking the chart icon.
This guide helps homeowners effectively use Ronseal One Coat Fence Life, a specialized opaque treatment designed for rough sawn exterior wood like fences and sheds. Its key advantage is providing excellent colour and protection in just one coat, drying quickly for convenience. However, users should note its specific formulation for rough sawn surfaces, ensuring optimal results on appropriate timber types.
| Colour | Red |
|---|---|
| Brand | Ronseal |
No, this product is specifically formulated and designed for rough sawn timber surfaces like fences and sheds. Its adhesion and performance may not be optimal on smooth or planed wood.
Ronseal One Coat Fence Life is touch dry in just 1 hour, allowing for quick project completion.
No, a primer is not typically required. This product is designed to provide colour and protection in one coat directly onto clean, dry, rough sawn timber.
A 9L tub provides approximately 54 square meters of coverage (based on 6 square meters per liter), which is sufficient for most standard garden fences and sheds.
For best results, apply with a good quality paintbrush, working the paint evenly into the grain of the rough sawn timber.
No, Ronseal One Coat Fence Life is an exterior wood paint and is not recommended for indoor use.
Clean brushes and other application tools immediately after use with warm, soapy water. Rinse thoroughly and allow to dry.
Ensure the product was thoroughly stirred before and during application. Apply evenly, working the paint into the rough sawn timber. A second coat can be applied for improved colour uniformity if desired.
Check the weather conditions; high humidity or low temperatures can extend drying times. Ensure the timber surface was completely dry before application. Apply in thin, even coats rather than thick layers.
Verify that the surface was clean and free from loose debris before painting. Ensure the product was well-stirred. Rough sawn timber can be very absorbent; apply sufficient paint to saturate the surface, adhering to the recommended coverage rate.
This often indicates poor surface preparation. Ensure all loose material, old flaking paint, or dirt is removed from the timber before applying. The surface must be dry and clean for proper adhesion.
This product is specifically formulated for rough sawn exterior timber, such as garden fences and sheds. It may not adhere or perform optimally on smooth, planed, or previously varnished wood surfaces. It's not suitable for decking or garden furniture where heavy foot traffic or frequent skin contact occurs.