HydroSure Two Way Water Distributor - Silver - 3/4"

The HydroSure Two Way Water Distributor is designed to fit standard 3/4" threaded outdoor taps.

Yes, you can connect any two standard garden hoses or watering devices (e.g., sprinklers, drip irrigation systems, spray guns) to the two outlets.

Hand-tighten the distributor securely onto the tap. If leaks persist, check the tap's thread for damage and ensure the internal washer or seal within the distributor is intact and properly seated.

Connecting two hoses will divide the available water flow from the tap. If your water pressure is already low, you might notice a reduced flow to each individual outlet when both are in use simultaneously. For optimal performance, good water pressure is recommended.

This distributor is designed for standard garden use. While durable, it's best suited for typical garden hose pressures rather than specialized high-pressure washing systems which may require specific adapters.

To prevent damage from freezing, it is recommended to disconnect the distributor from the tap and store it in a dry, frost-free location during winter months.

Ensure the distributor is screwed on tightly to the tap. Check the tap's thread and the distributor's internal seal for damage. Re-seat the connection.

Check that both individual outlet valves on the distributor are fully open. Verify that the main tap is also fully open. Ensure household water pressure is adequate for two simultaneous outlets.

Ensure you are using a tap with a 3/4" thread. Check for any debris or damage on the tap's threads or the distributor's internal threads.