Metsä Wood Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 144mm - 18mm

No, Metsä Wood Smooth Planed Whitewood Spruce Stick Timber is designed for internal use. For outdoor applications, it would require significant pressure treatment and regular maintenance to protect against moisture, insects, and decay.

PSE stands for 'Planed Square Edge.' It means the timber has been machined on all four sides to create a smooth, consistent finish with precise, square edges. This reduces preparation time for your projects.

Yes, absolutely. The smooth planed surface of this spruce timber is ideal for accepting various finishes, including paints, stains, varnishes, and oils. Ensure the surface is clean and dry before application.

Standard woodworking tools are suitable. This includes hand saws, circular saws, miter saws for cutting, drills for pilot holes, and measuring tools like tape measures and squares. Always use sharp blades for cleaner cuts.

Store timber in a cool, dry, and well-ventilated area, preferably indoors. Lay the timber flat on a level surface to prevent warping or twisting. Keep it elevated from concrete floors to avoid moisture absorption.

Yes, Metsä Wood offers this smooth planed whitewood spruce stick timber in a range of different lengths, widths, and thicknesses to suit various project requirements. Please check the product range for other available dimensions.

Due to its smooth planed finish, extensive sanding is generally not required. However, for a truly pristine, glass-smooth finish, a light sanding with fine-grit sandpaper (e.g., 220 grit) before the first coat of finish can enhance adhesion and appearance.

Ensure your saw blade is sharp and appropriate for wood. Support the timber firmly on both sides of the cut line. Scoring the cut line with a utility knife before sawing can also help.

Ensure the timber surface is completely clean, dry, and free of dust or grease. For best results, lightly sand the surface with fine-grit sandpaper (e.g., 220 grit) before applying the first coat, then wipe clean.

This usually indicates improper storage. Always store timber flat on a level surface, elevated from the ground, in a dry, climate-controlled environment, away from direct heat sources or excessive humidity.

Always pre-drill pilot holes before inserting screws, especially when working close to the edges or ends of the timber. The pilot hole should be slightly smaller than the screw's core diameter.