Metsä Wood C16 Treated Cls Timber - (L)2.4M (W)140mm (T)38mm

C16 indicates the strength class of the timber, denoting its structural suitability. It signifies that the timber has been stress-graded to meet specific strength requirements.

While the timber is treated for protection, its primary application is for interior use. For outdoor projects, consider more suitable timber treatments or species.

Yes, you can paint or stain the timber. Ensure the timber is clean and dry before applying any coatings. Use products suitable for treated timber.

Store the timber in a dry, well-ventilated area, away from direct sunlight and moisture. Ensure it is kept off the ground.

Always wear safety glasses and a dust mask when cutting or sanding the timber. Avoid inhaling the sawdust and use gloves when handling.

Measure the dimensions of your project and determine the required spacing. Consider any waste when cutting and add a percentage (e.g., 10-15%) to your total calculation.

Use screws, nails, or other fasteners designed for treated timber to prevent corrosion. Stainless steel or coated fasteners are recommended.

Check storage conditions. Ensure it is stored flat on a level surface and away from moisture. If the warping is significant, consider using an alternative piece.

Ensure your saw blade is sharp and appropriate for cutting treated timber. Apply consistent pressure and follow a straight line.

Check the surrounding environment for excessive moisture. Ensure the timber is not in direct contact with the ground. Replace the affected area if necessary.