Cuprinol Garden Shades - Terracotta - 1L

No, this product is not formulated for the high-wear demands of decking surfaces.

A minimum of two coats is required to achieve the best colour and long-term protection.

Yes, once the paint is fully dry, it is considered safe for use on wood that pets or birds may come into contact with.

A 1L tin covers approximately 10-12 square metres depending on the porosity of the surface.

Yes, it is compatible with Cuprinol sprayers. Always refer to the sprayer's user guide before use.

It is touch dry in 1 hour under dry conditions, but you should wait 8 hours between coats.

Ensure the wood is clean and dry. If the surface was previously painted, lightly sand it to improve adhesion.

Ensure you are applying the product evenly along the grain and using a consistent amount of paint per brush stroke. Applying a second coat will help even out the appearance.

If the paint was washed away or affected by moisture before it dried, allow the area to dry completely, sand lightly if necessary, and re-apply in dry conditions.