Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and old flaking paint. For best results, prime bare plaster or previously painted surfaces with an appropriate primer. Stir the paint thoroughly before use.
Application: Apply with a brush, roller, or sprayer. For walls, a medium-pile roller is generally effective. For ceilings, a long-handled roller can be beneficial. Apply evenly, avoiding over-brushing or over-rolling. Allow adequate drying time between coats as recommended on the tin, typically 2-4 hours.
Compatibility: This paint is suitable for most interior walls and ceilings. It is not recommended for floors, exterior surfaces, or areas of constant immersion.
Care: Clean spills and drips immediately with warm water. Once dry, the painted surface can be wiped clean with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.