Setup, Compatibility & Care Instructions
Surface Preparation:
- Ensure the surface is clean, dry, and completely free from dust, grease, mould, or loose material.
- For previously painted surfaces, lightly abrade with sandpaper and remove dust.
- Bare wood may benefit from a suitable primer (refer to product packaging for recommendations).
- For metal, ensure it is free from rust and apply an appropriate metal primer if necessary.
Application:
- Stir the paint thoroughly before and during use.
- Apply with a good quality brush or roller.
- Apply in good weather conditions; avoid painting in direct strong sunlight or when rain is imminent.
- Always refer to the paint can for specific drying and recoating times. Allow adequate drying between coats for optimal durability.
Compatibility:
This paint is designed for exterior application on wood, metal, and masonry. It is not intended for use on plastics or flexible surfaces.
Care:
Clean application tools immediately after use with water. For the painted surface, clean gently with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.