Instarmac Ultracrete FTC 25kg - High Strength Concrete

Name: Instarmac Ultracrete FTC 25kg - High Strength Concrete
Brand: Instarmac
SKU: an5awd4bfd
Availability: InStock

UltraCrete FTC is a high strength, fast-setting concrete designed for both small and large floor r...

Best current price£39.95from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£39.95Visit shop

B&Q - Ultracrete Ftc Fast Track Concrete Rapid Repair And Screed 25Kg

Visit shop

All Offers

2 offers from £39.95

View price history by clicking the chart icon.

B&QB&Q - Ultracrete Ftc Fast Track Concrete Rapid Repair And Screed 25Kg

Free delivery in 1–3 days

£39.95

Visit shop

OnBuy.comHigh Strength Concrete Screed Floor Repair Ultracrete Ftc 25Kg 5015172260058

Free delivery in 1–3 days

£39.95

Visit shop

Product Information

Full details

The Instarmac Ultracrete FTC 25kg is a high-strength, rapid-setting concrete ideal for professionals and DIYers needing to quickly repair floors. Its primary benefit is a fast 1-hour initial set, allowing for rapid return to service. A key consideration is its specific application depth range (10mm-50mm), which must be adhered to for optimal performance.

All features

Brand	Instarmac

Extended Product Information

FAQs

What is the initial set time for Ultracrete FTC?

Ultracrete FTC has an initial set time of approximately 1 hour.

What is the minimum and maximum application depth?

The product can be applied in depths ranging from 10mm to 50mm.

Does this product cause corrosion or staining?

No, it is chloride-free and does not contain metallic aluminum, iron, or carbon, preventing corrosion and staining.

Can Ultracrete FTC be used for structural repairs?

Yes, it is a high-strength concrete designed for robust floor repairs, but always ensure proper preparation and application.

How much water should I use for mixing?

Refer to the product packaging for the exact water-to-mix ratio, as this is critical for performance.

Can I use this on walls?

Ultracrete FTC is specifically designed for floor repairs due to its aggregate size and setting properties. It is not typically recommended for vertical applications.

Troubleshooting

Concrete setting too quickly

Ensure accurate water measurement. Do not add more water than specified. Work in smaller batches if needed in hot weather.

Concrete cracking after setting

Check substrate preparation for soundness. Ensure correct mixing ratios and avoid over-watering. Adhere to the specified application depth.

Poor surface finish

Use appropriate troweling techniques. Ensure the mix is consistent. Avoid overworking the surface.

Pros and Cons

Pros

Extremely fast setting time allows for quick project completion.
High strength provides long-lasting and durable repairs.
Prevents corrosion and staining, protecting adjacent surfaces.
Suitable for a range of repair depths.

Cons

Limited to specific application depths (10mm-50mm).
Requires precise mixing for optimal performance.
Not suitable for very fine decorative finishes.

Setup, Compatibility & Care

Setup:

Ensure the area to be repaired is clean, dust-free, and structurally sound. Remove all loose debris.
Mix the Ultracrete FTC with clean water according to the manufacturer's instructions. Use a mechanical mixer for best results.
Apply the mixed concrete within 30 minutes of mixing.
Trowel to the desired finish. Ensure application is between 10mm and 50mm depth.

Compatibility:

Suitable for concrete substrates.
Not recommended for use with certain types of aluminum or galvanized steel if prolonged direct contact is expected in corrosive environments, though the product itself is designed to prevent corrosion.

Care:

Cure the repaired area appropriately, especially in adverse weather conditions. Light foot traffic can usually resume after 1 hour, with heavy traffic after 2-3 hours.
Keep the product stored in a cool, dry place away from moisture.