Dulux Weathershield Undercoat - Grey - 750Ml

This undercoat is suitable for various exterior surfaces, including wood, metal, doors, garage doors, and window frames. Ensure surfaces are properly prepared before application.

The undercoat is quick-drying and typically touch-dry within 2 hours. Allow 2-4 hours between coats and before applying the topcoat.

One litre of Dulux Weathershield Quick Dry Undercoat covers approximately 16 m².

Yes, it is recommended to prime bare wood with Weathershield Exterior Preservative Primer+ and bare metal with Dulux Primer & Undercoat for Multi Surfaces.

No, this undercoat is specifically designed for exterior use only.

It is designed to be used with Dulux Weathershield Exterior Gloss or Satin topcoats to achieve the best results and weather protection.

Remove excess paint from the brush with a cloth, then wash with water.

Store paint in dry conditions and protect it from extreme temperatures.

Ensure the surface is clean, dry, and properly prepared. Sand the surface to remove any sheen and apply the correct primer.

Ensure the undercoat is fully dry before applying the topcoat. Apply thin, even coats and avoid over application. The flexible nature of this paint helps to resist cracking, but this is best achieved when used as directed.

Treat the affected area with a fungicidal wash before applying the undercoat and topcoat.

Ensure the application is in dry conditions, and the temperature is above 10 degrees Celsius. Allow sufficient time between coats, as recommended.