Alwayspon Wall Tile Transfers Sticker - Brown - Geometric
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Alwayspon Wall Tile Transfers Sticker in Brown Geometric is designed for homeowners and renters looking for a quick, easy, and affordable way to update their spaces. Its key benefit is the instant aesthetic upgrade without the mess or commitment of traditional tiling. A potential caveat is that while durable, they are stickers and may not replicate the exact feel or longevity of real tiles under heavy-duty conditions.
All features
| Colour | Brown |
|---|---|
| Pattern | Geometric |
| Brand | Alwayspon |
Extended Product Information
FAQs
Can these stickers be removed?
Yes, they are designed to be removable. For best results, gently heat the sticker with a hairdryer to soften the adhesive, then slowly peel it away from the surface.
Will these damage my walls when removed?
Typically, they should not damage properly painted walls if removed carefully and slowly, especially after applying gentle heat. However, results may vary on delicate or old paint finishes.
Are these suitable for high-moisture areas like a shower?
They are waterproof and oilproof, making them suitable for backsplashes and areas prone to splashing. Prolonged direct water exposure or immersion, such as in a shower stall, may affect long-term adhesion and durability.
How many stickers are in a set?
Each set contains 25 pieces.
What are the dimensions of each sticker?
Each sticker measures 15 x 15cm / 5.91 x 5.91 inches.
Can I cut the stickers to fit smaller spaces?
While they are designed to be used as is, you could potentially cut them with sharp scissors or a craft knife if needed, but this may affect the finished look.
Are these suitable for floors?
They can be used on floors, especially in low-traffic areas like entryways or accent areas. For high-traffic zones, their durability might be limited compared to actual flooring.
Troubleshooting
Stickers not adhering well
Ensure the surface is thoroughly cleaned, dried, and free from dust, oil, or residue. Reheat gently with a hairdryer and press down firmly.
Bubbles appearing under the sticker
Carefully lift the edge of the sticker near the bubble and smooth it down again, using a credit card or squeegee to push air out. For small bubbles, a pin prick may allow air to escape.
Difficulty aligning stickers for a seamless look
Take your time and use a level or grid lines on the backing paper (if available) for accurate placement. Overlapping slightly can sometimes help with alignment on uneven surfaces.
Stickers peeling at the edges
Apply gentle heat with a hairdryer to the edge and press firmly back into place. Ensure no moisture or dirt is trapped under the edge.
Pros and Cons
Pros
- Easy and fast installation
- Waterproof and easy to clean
- Provides a significant visual update
- Suitable for various surfaces and rooms
- Cost-effective alternative to real tiles
Cons
- Not as durable as real tiles
- May leave residue if removed improperly
- Surface must be smooth and clean for best adhesion
- Limited texture compared to actual tiles
Setup, Compatibility & Care
Setup: Ensure the surface you intend to apply the stickers to is clean, dry, and free from dust, grease, or soap residue. For best results, the surface should be smooth. Carefully peel the backing from one corner of the sticker and align it with the desired starting point. Slowly smooth the sticker down, pressing firmly to ensure good adhesion and to eliminate air bubbles. Continue applying the remaining stickers, ensuring they are aligned correctly for a seamless look.
Compatibility: These stickers are compatible with most smooth, non-porous surfaces including painted drywall, glass, metal, and finished wood. They are not recommended for use on textured walls, unpainted wood, porous surfaces, or floors that experience very heavy foot traffic, as this may reduce adhesion and durability.
Care: Cleaning is straightforward. Wipe the surface with a damp cloth and mild soap if necessary. Avoid using abrasive cleaners or scrubbing pads, as these can damage the protective film and the print. For stubborn dirt or grease, a gentle cleaner specifically designed for tile or laminate surfaces can be used. Ensure the surface is dried after cleaning.