Alwayspon Sj033 Wall Tile Transfers Sticker - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and renters looking to quickly and affordably update their kitchens, bathrooms, or living spaces. The Alwayspon Sj033 Wall Tile Transfers offer a simple peel-and-stick solution for a fresh look on walls, floors, or splashbacks. While convenient for redecoration, they are primarily designed for surface enhancement rather than structural change.
All features
| Colour | Blue |
|---|---|
| Model Part Number | Sj033 |
| Brand | Alwayspon |
Extended Product Information
FAQs
Can I reposition the sticker if I make a mistake during application?
Yes, you can carefully lift and reposition the sticker within a short time after application, especially if the surface is smooth and clean. Be gentle to avoid stretching or tearing.
Are these stickers suitable for use on floors?
Yes, they are designed for both wall and floor tile applications. However, for high-traffic floor areas, ensure proper adhesion and consider using a floor-safe sealant over them for added durability.
How many stickers are in a pack?
Each set includes 25 pieces.
What are the dimensions of each sticker?
Each sticker measures 15 x 15cm (approximately 5.91 x 5.91 inches).
Can I cut the stickers to fit specific areas?
Yes, you can carefully cut the stickers with scissors or a craft knife to fit around outlets or into specific shapes.
Are these stickers suitable for outdoor use?
These stickers are designed for indoor use. Prolonged exposure to direct sunlight and weather conditions may affect their color and adhesion.
How long do the stickers typically last?
When applied to a clean, smooth surface and properly cared for, they can last for several years. Their lifespan may vary depending on environmental factors and traffic.
Troubleshooting
Stickers are not adhering well.
Ensure the surface is thoroughly cleaned, dried, and free of dust or grease. The surface must be smooth and non-porous. Reapply pressure with a soft cloth.
Air bubbles are trapped under the sticker.
Gently lift the corner of the sticker where the bubble is and reapply, smoothing from the center outwards. A pin prick can release stubborn bubbles, but this may affect water resistance in that spot.
Difficulty removing the sticker.
Gently heat the sticker with a hairdryer on a low setting. This can soften the adhesive, making it easier to peel off slowly at an angle.
Color fading or damage after cleaning.
Avoid using harsh chemical cleaners or abrasive materials. Stick to a soft, damp cloth and mild soap if necessary.
Pros and Cons
Pros
- Easy and quick to apply without mess.
- Removable, making them suitable for renters.
- Waterproof and oilproof for simple maintenance.
- Bright, fade-resistant HD printed designs.
- Versatile for multiple surfaces and rooms.
Cons
- Primarily decorative; not a structural upgrade.
- May not cover heavily textured or damaged surfaces perfectly.
- Long-term adhesion on very high-heat surfaces is unverified.
- Requires careful application to avoid air bubbles.
- Design might not match existing permanent tile patterns exactly.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and smooth before application. Peel the backing off one corner and carefully apply the sticker, smoothing it down as you go to avoid air bubbles. For best results, have a soft cloth or squeegee to gently press out any trapped air.
Compatibility: These stickers are compatible with most smooth, non-porous surfaces including tile, glass, painted drywall, and finished wood. Avoid applying to unpainted wood, textured walls, fabric, or surfaces with peeling paint.
Care: Clean using a soft, damp cloth. For tougher spots, use mild soap and water. Avoid abrasive cleaners or scrub pads, as these can damage the protective film and print. The stickers are waterproof and oilproof, making cleaning straightforward.